# Code Conversion Guide/id

Deutsch (de) English (en) español (es) français (fr) Bahasa Indonesia (id) 日本語 (ja) português (pt) русский (ru) slovenčina (sk)

This page is about how to convert existing Delphi or Kylix code to work with the Free Pascal Compiler and Lazarus IDE. While Lazarus and the Free Pascal Compiler have aspects in common with Delphi and Kylix, they are not clones. There are a number of library call and convention differences... and in some areas, FPC is enhanced and can be more demanding about correct syntax. Please see the Lazarus For Delphi Users guide for a description of some of the functional differences.

The purpose of this guide is to document some of the specific differences that are frequently encountered during the code conversion process when translating existing code from Delphi to Lazarus.

This document was placed into the wiki knowledge-base area so it could be easily extended by anyone who had encountered a unique problem and would like to post it for others to be aware of.

## Memilih komponen atau librari untuk konversi

### Di mana mencari kode untuk dikonversi

There is a LOT of code available on the net that can be converted for use with FPC and Lazarus. Here is a Page Of Code Sites that is just a start. Please add to it if you know of any other good locations. TurboPower Software has recently released their entire commercial offering under the MPL. A list of available packages can be found here.

To avoid duplicating effort, packages that have already been converted are listed on the Components and Code examples page. If you've converted a package or are working on one, please add a note on the Current conversion projects page.

### Lisensi

Licenses for existing code range from freeware/public domain to restrictive versions that prohibit modification, re-distribution and commercial use. Before converting any package, it's a good idea to examine its licensing and make sure it's going to be compatible with Lazarus and the Free Pascal Compiler. License selection is especially important with components since dropping one on a form can impose an unwanted or incompatible license on an entire application.

When converting components, please respect the wishes of the original author and retain all copyright and licensing headers along with email addresses and url's. It's courteous and often useful to inform the author that their component is being converted... especially if the component is under a restrictive license. New interest in an old or forgotten component can sometimes inspire authors to revise their original and overly restrictive licensing.

In general, Public Domain (freeware), and the LGPL/MPL are the the most flexible for distributing components. For more information, the Open Source Definition is a good place to start. There are also several comparisons available to help clarify how the various types of licenses work and what impact they'll have on code they're linked to. Search for "open source license comparison"

### Ketergantungan

Another step before starting to work on a conversion is to verify that the code doesn't have deep dependancies on other packages that might not be available or represent a considerable conversion challenge. Some freeware offerings are bound to or extend proprietary packages that are frequently no longer available or come with inappropriate licenses.

Lihat:

### Masalah Platform dan OS

Lazarus and the Free Pascal Compiler are cross-platform and cross-architecture development tools. In contrast, most existing Delphi code was specifically designed to run on an Intel processor under Win32. If your candidate component has a lot of Win32 specific code, it might be wise to try and find a less platform dependant alternative. But don't let this stop you... it's genuinely amazing what the LCL supports!

## Melakukan konversi

### Menyiapkan lingkungan Lazarus untuk proyek konversi

#### Buat proyek test

• Place code to be converted into a subdirectory (ie: convertdir)
• Bring up Lazarus
• File->Save All to the convertdir subdirectory. Meaningful names for the Project and default unit are optional.
• Open the "main" unit to be converted in convertdir
• Run Tools->Quick Syntax Check or Run Build All to get started.

#### Item awal untuk diperhatikan

• Filenames are case sensitive with the 1.0.x series compilers. If you're working with this version, make all your filenames lower case. You'll get "File not found" errors if you don't.

#### Sumber Delphi VCL, Kylix CLX dalam Lazarus

When converting Delphi/Kylix sources, it is often useful to do a find declaration to see, what a specific function is doing. The Lazarus IDE can parse the Delphi/Kylix sources. To do this it needs some searchpaths and compiler settings. You can easily setup this in Environment->CodeTools Defines Editor->Insert Template

### Masalah dan solusi konversi

#### Persamaan file Delphi / Kylix dalam Lazarus

Delphi / Kylix Description Lazarus Description
.pas

.dfm/.xfm,

.dcu/.dpu,

.dpr(main project file),

.res,

.dof/.kof

---

---

---

Delphi Source File,

Delphi Form,

Delphi Compiled Unit,

Delphi Project,

Windows Resource File,

Delphi Option File

.pas, .pp

.lfm,

.o,

.lpr

---

---

.lrs,

.lpi(main project file),

.ppu

Pascal unit file,

Form data file,

Compiled unit file,

Project file,

Resource file,

Project options file,

Lazarus resource file,

Lazarus project information file,

FPC unit description file

So a Delphi .dcu file roughly corresponds to a FPC .o and .ppu together in one file. The .PPU is mostly the header(interface) part, the .o mostly the implementation part. Main exceptions are inlined functions, that in to-be-inlined form are in the .ppu.

#### Mengkonversi Delphi project/form/unit ke Lazarus

Rename or copy the .dpr file to a .lpr file. Comment out or remove the
{$R *.res} directive and add a {$mode delphi}{$H+} or {$mode objfpc}{$H+} directive to the .lpr file. The Lazarus IDE can assist in this conversion through the Tools menu item "Convert Delphi Project to Lazarus Project". It asks for a .dpr (Delphi Project) file and converts it to .lpr; furthermore, it creates the .lpi file and converts all units. Many existing Delphi forms can be converted to work with Lazarus by using the IDE's built in .dfm to .lfm form converter. It can be found under the Tools menu item as "Convert DFM file to LFM". Bring up the file dialog, select the dfm and the converter will do the rest. If you need to convert the whole unit (with or without a form), Lazarus also includes a built in "Convert Delphi unit to Lazarus unit" which will do the following for you - 1. fixes the case of include filenames and uses sections. 2. converts .dfm file to .lfm file (currently without content check, just format) 3. creates an empty .lrs file (the content will be created later) 4. adds {$mode delphi}
directive
5. replaces windows unit with LCLIntf
6. adds LResources unit if needed (i.e., if unit.lrs is to be used;
uses LResources
can be in the implementation part)
7. removes variants unit
8. removes
{$R *.dfm} directive 9. adds initialization section and {$i unit.lrs}
directive

This allows quick and easy conversion of most units from Delphi format to Lazarus format. It does not do any validity check, or automatic syntax changes, so any syntax changes you need to make, additional unit/unit name changes, or dfm/pas changes for control/component differences you must still do manually, though in time some wizards to help facilitate some of this, especially the repairing of converted forms(lfm), may become available.

#### Memilih mode kompilator yang benar

Kompilator Free Pascal supports 5 different pascal modes. For example TP for turbo pascal, lets you compile turbo pascal units. There is also a DELPHI compatibility mode that can be set to make existing code easier to convert. Lazarus prefers the OBJFPC mode, which almost equals the DELPHI mode, but is less ambigious than the Delphi syntax. Here are the important points:

The mode can be selected at command line or at the start of the source. Using the command line has the advantage, that you don't need to change the source, but the disadvantage, that others must be told.

Most Delphi units can be compiled by the Free Pascal compiler by adding

{$IFDEF FPC} {$MODE DELPHI}
{$ENDIF}  right after the unit name. For more details about Free Pascal modes see the Free Pascal Documentation #### Pertimbangan Lintas-Platform • Inline assembler is always a problem because it will bind the code to the Intel architecture. Some developers do algorithm prototypes in Pascal and ifdef the their optimized assembler. Fortunately TurboPower did this in numerous places with their code. If this is the case with the package you're converting, throw the switch back to Pascal. • Don't reference specific memory location like the BIOS data area. Find out what the code needs and try to find a cross platform alternative. • Don't do processor specific tricks (like using the Intel TSC) without enclosing your code in an ifdef for the platform the code needs... and providing an alternative for environments that don't have the hardware capability. • If you need some OS specific code, then you can use IFDEFs. See below for a list of macros. #### Variabel / define / makro kompilator yang berguna To write code, that behaves on different systems differently, you can use the {$IFDEF Name}
directives.
• {$IfDef FPC} This variable is defined, when using the FPC compiler. Useful to write code, that works with FPC and Delphi. For compatibility reasons FPC defines the DELPHI makro in mode Delphi. So you can not use {$IFNDEF DELPHI}.

• {$IfDef LCL} This variable is defined, when using the LCL package. Useful to write code, that works with the LCL and Delphi. • {$IfDef LCLGtk}
,
{$IfDef LCLWin32} , {$IfDef LCLQt}
, ...

This variable is defined, when using the LCL package and the specific widgetset is currently used. Useful to write code, that works with the LCL on a specific platform.

• {$IfDef Unix} , {$IfDef Win32}
, ...

Defined by FPC for the current Target OS. Delphi defines "Linux", "Win32" and "MSWindows". Free Pascal runs on much more platforms and so it is recommended to use the more general items. For example "Unix" is defined for Linux, FreeBSD, NetBSD and OpenBSD, where Lazarus already runs. Use for code that should work with Delphi and FPC:

{$IfDef Linux} {$Define Unix}
{$EndIf}  to work around this for Kylix. • {$IfDef ENDIAN_BIG}

This variable is defined on processors like the powerpc (for example older Apple computer, e.g. till MacOSX 10.2) that have the reversed byte order than intel compatible processors.

• {$IfDef ENDIAN_BIG} For more details see the Free Pascal Documentation. #### Dukungan 32bit / 64 bit Pointers under 64bit need 8 bytes instead of 4 on 32bit. The 'Integer' type remains for compatibility 32bit. This means you can no longer typecast pointers into integers and back. FPC defines two new types: PtrInt and PtrUInt. PtrInt is a 32bit signed integer on 32 bit platforms and a 64bit signed integer on 64bit platforms. The same for PtrUInt, but unsigned integer instead. Use for code that should work with Delphi and FPC:  {$IFNDEF FPC}
type
PtrInt = integer;
PtrUInt = cardinal;
{$ENDIF}  Replace all integer(SomePointerOrObject) with PtrInt(SomePointerOrObject). #### Mencari identifier yang kurang There are differences in how the LCL is organized when compared to the Delphi VCL. If you get a "not found" compiler error about a major class or identifier, the chances are good that it's in a different unit. A complete cross reference can be found by grep'ing lazarus/docs/xml or the lcl subdirectory. For example the commonly used tbutton typically throws an error in Delphi code because it's located in a unit named buttons.pp. The following command finds the correct unit very quickly (in the lazarus source directory):  grep -in ' tbutton =' lcl/*  #### Perbedaan unit utama antara Lazarus dan Delphi Silahkan menambah ke topik ini! • Windows->Interfaces, LCLIntf, LCLType, LCLProc, VCLGlobals, ...) As the LCL is not windows specific, the code that is in the Delphi Windows unit for directly accessing the Win32 API is abstracted into seperate interfaces, which can be accessed from the LCLIntf unit. Keep in mind, that Lazarus does not emulate win32, so many functions are missing and some do not work as their win32 counterparts. These functions only exist for Delphi compatibility and should only be used for quick & dirty porting. LCL also breaks out many of the types, so often LCLType, and sometimes VCLGlobals are required. LCLProc also contains a few functions which can be useful for lower level handling such as "FreeThenNil" as is in Delphi 5 and higher, "DeleteAmpersands" to remove additional ampersands from a string for controls(& vs && etc). The Interfaces unit needs to be included in the .lpr file to initialize the appropriate widgetset. • Messages->LMessages TControl Messages for win32 event callbacks of the format WM_CALLBACK and the structs associated with them are often found in the Messages unit in Delphi. In the LCL these types of messages and there structs are usually found in LMessages, usually with name changes of WM to LM, so for instance WM_MOUSEENTER becomes LM_MOUSEENTER, and TWMMouse becomes TLMMouse. • Graphics, Controls->GraphTypes, GraphMath, Graphics, Controls To simplify some things and break complexity of circles between units, a few types have been abstracted into a shared unit called GraphType, which includes things, which in Delphi are located in Graphics or Controls, for instance the bvNone etc of panels. So sometimes you have to include it. Also a unit which, although incompatible with Delphi, adds other useful functionality is GraphMath, which adds a TFloatPoint for precision, misc routines for dealing with beziers, lines, and arcs, as well as some operator overloading for use with TPoints and TRect, such as for instance Point1 := Point2 + Point3, and comparing two rects like if (rect1 = rect2) then ... • Mask->MaskEdit For more intelligent naming considerations, the unit for TMaskEdit is called [MaskEdit|] instead of the slightly more nebulous Mask as in many versions of Delphi. • StdCtrls->StdCtrls,Buttons In many version of Delphi TButton is located in StdCtrls, while TSpeedButton and TBitBtn are in Buttons. For consistency and simplicity the LCL puts all button types in Buttons, which can occasionally break code conversion, so it is always a good idea to include. #### Property and method differences Delphi -> FPC/LCL • TBitmap contains a canvas in the LCL #### Semantical differences ##### Order of parameter evaluation Delphi guarantees that all parameters are evaluated from left to right. FPC makes no such guarantee, and can evaluate parameters in any order it wants in order to generate optimal code. ##### Nested procedures/functions as procedural variables Delphi passes the framepointer of the parent procedure always on the stack, and has the caller remove it again. This means that as long as you do not access variables from a parent procedure, you can pass the address of a nested function to another function which then can call it like any other procedural variable. FPC on the other hand always passes the framepointer of the parent procedure as a hidden first parameter according to the current calling convention, which means that if you call a nested procedure like a regular procedural variable, all parameters will be "shifted" one position. In short, do not call nested procedures via procedural variables. #### Syntax differences Please add to this topic! Because of the inherent strictness in FPC, some syntax changes are necessary, even though {$Mode Delphi}
does allow more laziness like Delphi does. For this reason complying as much with the syntax rules of
{$I myresource.lrs} end. ### Another method to convert a Delphi or Kylix project to Lazarus • Rename or copy all .dfm or .xfm files to .lfm (Early Delphi versions do not produce a text-based .dfm file. The convert utility, if present in the \bin folder can be used to covert the .dfm first)) • Rename or copy .dpr file to .lpr • Make necessary changes to .lpr file: 1. Add {$mode delphi}{$H+} or {$mode objfpc}{H+} directives
2. Add 'Interfaces' to uses clause
3. Comment out or delete {$R *.res} or directive • Make necessary changes to all .pas unit files: 1. Add {$mode delphi}{$H+} or {$mode objfpc}{H+} directives
2. Add 'LResources', and if the form has buttons, add 'Buttons' to uses clause
3. Comment out or delete {$R *.dfm} or {$R *.xfm} directive
4. Add 'Initialization' section at the end of each unit file, and add {\$I unitname.lrs} directive in it
• Select Project->New Project from file
• Select the .lpr file
• At 'Create a new project' window, choose 'Application'
• Build project and make further necessary corrections to get proper compilation, at this point the .lpi file is generated automaticaly. You may also get 'Error reading Form' messages, click on 'Continue Loading' if you do.
• Save all, and you have a Lazarus project :-)

## Getting Help

If you encounter a problem during conversion that you just can't solve, there are a wide variety of places to get help.

### Documentation

For pure Object Pascal and FPC issues The best place to start is the Free Pascal Documentation by Michaël Van Canneyt and Florian Klämpfl.
For more Lazarus oriented problems The Lazarus Project Documentation in the Lazarus-CCR Knowledgebase Main Page is the next place to look.

### Peer support

Mailing lists You can post a question on any of the mailing lists for the Free Pascal Compiler or the FPC forums where a lot of experts are subscribed.
If you have access to IRC: On irc.freenode.net: #fpc for FPC, or #lazarus-ide for Lazarus

### Knowledge bases

There are some outstanding search and knowledge bases online that can also be a great help for learning new techniques and solving problems:

• Tamarack Associates operates a fast search engine specifically for the Borland usenet archives.
• Mer Systems Inc. provides a similar search engine.
• Another outstanding source of information along with a sitewide search capability is Earl F. Glynn's Computer Lab and Reference Library.

## Packaging and Releasing your component

### Creating a Lazarus package for your component(s)

Creating a package makes installing the code you've converted a much easier process... especially if you're providing more then one component. Mattias Gärtner has written an overview of Lazarus Packages that should be read before beginning this process.

### Documentation

The purpose of this site and the wiki format is to make the generation of professional documentation an easy and quick process. The wiki also makes it possible to see the results of your posting immediately and make any changes you'd like in real time.

Using the Lazarus-CCR wiki to create nice looking documentation is very easy. If you've never used wiki markup before, you can get familiar with it in the Sand Box practice area.

### Creating a Code Release Page

The following procedure will let you create a Code Release Page with your browser:

• Go to the Release new component
• Type the name of your component in the textbox and click on Create Article
• Fill in the template and hit save.
• Edit the Components and Code examples page and add the link to your newly created page to the "Released Components" section. Save the modified page.

### Submitting the component

If you're a release technician on the project, upload your component to the SourceForge File Release System and add it to the list of release packages. Otherwise send it to one of the project administrators (Tom Lisjac or Vincent Snijders) and we'll add it to the repository. Before we upload it to SourceForge, you have to create a Code Release Page to describe your component. You can use the Release new component page, to start creating such a page.

If you think you need to continue to develop on the component, we can also put it into SVN so you'll continue to have access to it. If we get tired from submitting your patches, we will give you write access to the SVN, so you can commit your patches yourself. For details see Using the Lazarus-ccr SVN repository.