Setup Cross Compile For ARM

From Free Pascal wiki
Jump to: navigation, search

English (en)Magyar (hu)Bahasa Indonesia (id)Русский (ru)


Contents

How To setup Lazarus/FPC for arm-linux cross compiling.

With this tutorial you can make a binary file that runs on arm-linux devices. This is tested with a Nokia N900 with "Maemo 5 OS" (the gnu/linux Debian based OS, developed by Nokia. It is an arm-linux device that runs GTK2 and QT4.6). If you need a simply "command prompt"/"terminal" program, after #FPC for ARM section skip to #APPENDIX A: Testing console programs.

NOTE 1: All procedures are tested on a Virtual Machine with Ubuntu 9.10 - x86 with Windows 7 as host and VirtualBox 3.0.12 as virtual machine. It is a fresh install, with all updates at today.

NOTE 2: I don't know if this tutorial follows the better way to do all things... I'm not big expert about linux dev or commands, so please help me to improve this guide! You can discuss and repost HERE

NOTE 3: Replace every /home/user/ with your real user path. All other paths are simply for explanation. If you use "Maemo SDK Virtual Image", replace every /home/user/ with /home/maemo/


Automated Script

The previously provided scripts are obsolete. Please see HERE (read NOTE 2) for alternative.

Generic things to do

Warning-icon.png

Warning: These instructions are quite old - they refer to 2.2.4 while the current (December 2013) stable FPC is 2.6.2. Please adjust as you follow these and update the page. Thanks.

Downloads

  • any starting compiler from the 2.2.4 branch (e.g. fpc-2.2.4-20091214.i386.rpm) from HERE or HERE). It is needed to compile >= 2.2.4 fpc sources
  • latest binutils.tar.gz (e.g. binutils-2.20.tar.gz) from HERE
  • latest fpc.zip from HERE
  • latest Lazarus source zip (e.g. lazarus-0.9.29-23129-20091214-src.zip) from HERE or HERE (faster for me)
  • target libs (You can grab from SDK or from arm-device. See "#APPENDIX A: Testing console programs")

Unpack/copy all files in the respective directories

FPC 2.2.4 installer:

~/fpc_tools/fpc_2.2.4/fpc-2.2.4-20091214.i386.rpm

Binutils sources:

~/fpc_tools/binutils-2.20/

Lazarus sources:

~/lazarus/

FPC 2.5.1 sources:

~/lazarus/fpc/2.5.1/

Prepare Target Libs

Install dependencies

sudo apt-get install -y alien libncurses5-dev libXp-dev libgtk2.0-dev

Install & Configure Binutils

Compile binutils for arm-linux

  • If not already done, extract binutils-2.20.tar.gz in ~/fpc_tools/binutils-2.20
  • Then type:
cd ~/fpc_tools/binutils-2.20
./configure --target=arm-linux --disable-werror
make
sudo make install
mkdir ~/lazarus/fpc/binutils
ln -s /usr/local/bin/arm-linux-ar ~/lazarus/fpc/binutils/ar
ln -s /usr/local/bin/arm-linux-ld ~/lazarus/fpc/binutils/ld
sudo mv /usr/local/bin/arm-linux-as /usr/local/bin/arm-linux-as_org
 
sudo gedit /usr/local/bin/arm-linux-as
  • Paste:
#!/bin/sh
/usr/local/bin/arm-linux-as_org -meabi=5 $@

NOTE: option -meabi=5 force assembler to make binary eabi v5 compatible. E.g. if you need eabi v4 you will change it in -meabi=4.

  • Save and close gedit
  • Type:
sudo chmod +x /usr/local/bin/arm-linux-as
ln -s /usr/local/bin/arm-linux-as ~/lazarus/fpc/binutils/as

FPC

Install precompiled fpc 2.2.4 branch

REMEMBER TO CHANGE EVERY /home/user/ WITH YOUR OWN USER PATH!

  • Type:
sudo alien -i -c /home/user/fpc_tools/fpc_2.2.4/fpc-2.2.4-20091214.i386.rpm
  • Be sure that ppc386 is right installed, type:
which ppc386

if ppc386 is in the path it returns the path (e.g. /usr/bin/ppc386)

Compile FPC from sources

  • Type:
cd ~/lazarus/fpc/2.5.1
make all OPT='-gl -O3p3' PP=/usr/bin/ppc386 (add NOGDB=1 at the end if asked)
sudo make install PP=/usr/bin/ppc386 PREFIX=/usr/ (add NOGDB=1 at the end if asked)
sudo rm /usr/bin/ppc386
sudo ln -s /usr/lib/fpc/2.5.1/ppc386 /usr/bin/ppc386
sudo mkdir /usr/share/fpcsrc/
sudo ln -sf ~/lazarus/fpc/2.5.1/ /usr/share/fpcsrc/
sudo /usr/lib/fpc/2.5.1/samplecfg /usr/lib/fpc/2.5.1/ /etc

FPC for ARM

Make FPC able to cross compile for arm-linux

  • Type:
cd ~/lazarus/fpc/2.5.1/
sudo make crossinstall CPU_TARGET=arm OS_TARGET=linux CROSSBINDIR=/home/user/lazarus/fpc/binutils/ OPT=-dFPC_ARMEL INSTALL_PREFIX=/usr

Create custom fpc.cfg

REMEMBER TO CHANGE EVERY /home/user/ WITH YOUR OWN USER PATH!

  • Type:
gedit ~/.fpc.cfg
  • Paste in ~/.fpc.cfg:
#INCLUDE /etc/fpc.cfg
#DEFINE DEMOTEST
#DEFINE DEMOTEST1
#DEFINE LAZARUS

-Fu/usr/lib/fpc/2.5.1/units/$fpctarget/*
-Fl/usr/lib/fpc/2.5.1/units/$fpctarget/rtl/

-a
-Sd
-Xd
-Xs

-O-

#IFDEF CPUARM
-XP/home/user/lazarus/fpc/binutils/
-Xr/usr/lib/fpc/2.5.1/units/arm-linux/rtl/
-Xr/home/user/lazarus/fpc/libcross
-XR/home/user/lazarus/fpc/
-darm
-Tlinux
#ENDIF
  • save and close gedit
  • Type:
sudo ln -sf /usr/lib/fpc/2.5.1/ppcrossarm /usr/local/bin/ppcarm

Lazarus

If you don't need graphical programs, you can skip this section and go directly to #Appendix B: Target libs

Compile Lazarus

  • Type:
cd ~/lazarus
make clean all

Start Lazarus

  • Start Lazarus to see that everything is ok and then to compile LCL and Package Registration
  • Type:
./lazarus

Configure Lazarus for cross Compile

  • Now you must cross compile the LCL and Package Registration, this part come from HERE.
  • From the IDE:
    1. In Tools -> Options -> Environment -> Files, set the Compiler path to the path to fpc. Normally this is already done.
    2. Then open Tools / Configure Build Lazarus / Advanced Build Options.
    3. Set Target OS as linux and Target CPU as arm.
    4. Set LCL and Package registration to Build (the middle radio button) and all other to None (left radio buttons).
    5. Click the Build button.

Make your first arm-linux project in Lazarus

New Project

  • Start new project as application
  • Put some component in main form to test (like button, memo and few other things)

Set Targets

  • From the IDE:
    1. Set in Project / Compiler Options / Code generation / Target OS (-T): Linux
    2. Set in Project / Compiler Options / Code generation / Target CPU family (-P): arm
    3. Set in Project / Compiler Options / Other / Custom Option: enter -XParm-linux- into textbox

Add target libs to your project

REMEMBER TO CHANGE EVERY /home/user/ WITH YOUR OWN USER PATH!

  • From the IDE:
    1. Set in Project / Compiler Options / Linking / Options (-k): -L/home/user/lazarus/fpc/libcross
    2. Set in Project / Compiler Options / Compilation / Execute after / Command: arm-linux-strip -s /path/to/your/project/binary (where "binary" is the executable builded with Lazarus)

Build Project

  • Build Project as normal:
    1. Hit keys Ctrl+F9
    2. Run / Build

Time to run

  • Transfer the binary of your project on device
  • Generally you must give executable permission to the binary directly on the device. If you work in terminal type:
chmod +x /path/where/is/YourProject
./path/where/is/YourProject
Nokia N900
e.g. Maemo 5 running Lazarus graphical demo.

APPENDIX A: Testing console programs

Create a TestARM.pas

  • Type:
mkdir ~/dev/TestARM/
gedit ~/dev/TestARM/TestARM.pas
  • Paste this code:
program test;
begin
  writeln('DATE ',{$i %DATE%});
  writeln('FPCTARGET ',{$i %FPCTARGET%});
  writeln('FPCTARGETCPU ',{$i %FPCTARGETCPU%});
  writeln('FPCTARGETOS ',{$i %FPCTARGETOS%});
  writeln('FPCVERSION ',{$i %FPCVERSION%});
end.
  • Type:
cd ~/dev/TestARM/
fpc -Tlinux -Parm -XParm-linux- TestARM.pas

Time to run

  • Transfer TestARM on device
  • Generally you must give executable permission to TestARM directly on the device:
chmod +x /path/where/is/TestAMR
./path/where/is/TestAMR

Appendix B: Target libs

You need target libs to assemble and link binary file. You can find them into the SDK of your device or into the device itself.

E.g. for Nokia N900 you need to copy /lib/* and /usr/lib/* (no subdirs needed) that are present in the Nokia N900 root and you must merge all files to ~/lazarus/fpc/libcross/
Finally, you need to rename each library not found by linker (ld) to the file name searched by linker itself.

E.g. if you got this error

libX11.so not found (or incompatible)

and you have a file called libX11.so.6.2.0, then you need to rename it into libX11.so

See also

  • Android Article on setting up cross-compiling for Android on ARM
Personal tools