Difference between revisions of "TARGET Embedded"

From Free Pascal wiki
Jump to navigationJump to search
(Added Xtensa, Z80)
(38 intermediate revisions by 12 users not shown)
Line 1: Line 1:
The embedded target is still under development and only a few controllers are supported. Nevertheless, it's possible to create programs for embedded arm devices. The embedded target targets systems without any operating system and typically several kBs of RAM and several dozens of kB of flash. A typical target is the LPC family of NXP with popular members like the LPC2124 with 16 kB RAM and 256 kB flash using the ARM7 instruction set.
+
{{Embedded}}
 +
 
 +
The embedded target is still under development and only a few controller families are supported. These are ARM (several architectures), AVR, Pic32mx (Mipsel), Xtensa (ESP32) and Z80. The embedded target targets systems are without any operating system and typically only have several kBs of RAM and several dozens of kB of flash. A typical target is the LPC family of NXP with popular members like the LPC2124 with 16 kB RAM and 256 kB flash using the ARM7 instruction set.
  
 
= Embedded port =
 
= Embedded port =
Line 5: Line 7:
 
== Status ==
 
== Status ==
  
* usefull support is only available in 2.3.1 from svn
+
* best support is available in svn trunk version
* currently only arm-embedded is supported
+
* compilers are working, register definitions are available, but libs for peripheral's access are rare to non-existing. Hardware can be accessed via hardware registers.
* supported controllers are limited to NXP LPC controllers
+
* Not all controllers of each family are supported. If you're interested in support for further controllers, please subscribe to the [http://lists.freepascal.org/mailman/listinfo/fpc-devel fpc-devel mailing list] and write a mail so adding the support can be discussed
  
 
== ARM Embedded ==
 
== ARM Embedded ==
Line 14: Line 16:
 
Get latest FPC from svn:
 
Get latest FPC from svn:
  
  svn co http://svn.freepascal.org/svn/fpc/trunk fpc
+
<syntaxhighlight lang="bash">svn co http://svn.freepascal.org/svn/fpc/trunk fpc</syntaxhighlight>
  
 
Get arm-embedded binutils.
 
Get arm-embedded binutils.
Line 20: Line 22:
 
For windows, they are available at http://svn.freepascal.org/svn/fpcbuild/binaries/i386-win32. You can either checkout the whole directory with or download only arm-embedded-ar.exe, arm-embedded-as.exe, arm-embedded-ld.exe, arm-embedded-strip.exe, arm-embedded-objdump.exe and arm-embedded-objcopy.exe manually. Put these utils in a directory included in your path.
 
For windows, they are available at http://svn.freepascal.org/svn/fpcbuild/binaries/i386-win32. You can either checkout the whole directory with or download only arm-embedded-ar.exe, arm-embedded-as.exe, arm-embedded-ld.exe, arm-embedded-strip.exe, arm-embedded-objdump.exe and arm-embedded-objcopy.exe manually. Put these utils in a directory included in your path.
  
Build FPC for arm-embedded:
+
To build binutils from sources http://wiki.lazarus.freepascal.org/Binutils has instructions, for example, ./configure --target=arm-linux --prefix=/opt/embarm/ --program-prefix=arm-embedded- --disable-werror, has been known to work on binutils 2.21.1 to build the binaries in the form that the fpc target embedded build desires.
 +
 
 +
Build FPC for arm-embedded (OABI):
 +
 
 +
<syntaxhighlight lang="bash">
 +
cd fpc
 +
make clean buildbase installbase CROSSINSTALL=1 OS_TARGET=embedded CPU_TARGET=arm SUBARCH=armv4
 +
</syntaxhighlight>
  
  cd fpc
+
This builds only the compiler and the RTL instead of the whole FPC. Because of the limited capabilities of the embedded systems supposed to be used, building all packages is not useful. However, one must be careful to avoid overwriting an existing arm compiler on the system. If this is the case, INSTALL_PREFIX should be used to install into a different directory and switch between those.
  make clean buildbase installbase CROSSINSTALL=1 OS_TARGET=embedded CPU_TARGET=arm
 
  
This builds only the compiler and the rtl instead of the whole FPC. Because of the limited capabilities of the embedded systems supposed to be used, building all packages is not usefull. However, one must be carefull to avoid overwriting an existing arm compiler on the system. If this is the case, INSTALL_PREFIX should be used to install into a different directory and switch between those.
+
SUBARCH is required and should match your target processor, e.g.:
 +
* for the LPC 21xx parts which are ARM7TDMI (not to be confused with armv7!) based use SUBARCH=armv4
 +
* for cortex-m3 parts (stellaris, stm32, etc) use SUBARCH=armv7m
 +
* for cortex-m devices that support DSP extensions use SUBARCH=armv7em. The compiler does not yet support the cortex-m* FPU
 +
* for cortex-m0 devices use -Cparmv6m
  
=== Testing ===
+
=== NXP LPC2124 example ===
  
Below you find a simple example program
+
Below you find a simple example program for the LPC2124 microcontroller, save it as tled1.pp to follow the description. The program is made for development boards like the LPC-WEB from OLIMEX (http://www.olimex.com/dev/lpc-e2124.html). When you press button 1, led 1 lights for a certain time, same for button 2 and led 2.
  
<source lang="delphi">
+
<syntaxhighlight lang="pascal">
 
procedure Wait(d : dword);
 
procedure Wait(d : dword);
 
begin
 
begin
Line 37: Line 49:
 
     dec(d);
 
     dec(d);
 
end;
 
end;
 
  
 
begin
 
begin
Line 86: Line 97:
 
     end;
 
     end;
 
end.
 
end.
 +
</syntaxhighlight>
  
</source>
+
If FPC for arm-embedded is installed as described above, the program can be compiled by
  
If FPC for arm-embedded is installed as described above, the program can be compiled with
+
<syntaxhighlight lang="bash">fpc -Parm -Tembedded -Wplpc2124 tled1.pp</syntaxhighlight>
  
  fpc -Parm -Tembedded -Wplpc2124 tled1.pp
+
<syntaxhighlight lang="bash">-Parm</syntaxhighlight>
 
 
  -Parm
 
  
 
tells the compiler to compile for arm.
 
tells the compiler to compile for arm.
  
  -Tembedded
+
<syntaxhighlight lang="bash">-Tembedded</syntaxhighlight>
  
 
tells the compiler to compile for the embedded target.
 
tells the compiler to compile for the embedded target.
  
  -Wplpc2124
+
<syntaxhighlight lang="bash">-Wplpc2124</syntaxhighlight>
  
 
tells the compiler to compile for the NXP LPC 2124. This has two effects: first, a unit (lpc21x4 in this case) containing the startup code and the port etc. definitions for this controller is loaded. Further, the compiler uses a linker script which fits the needs of this controller.
 
tells the compiler to compile for the NXP LPC 2124. This has two effects: first, a unit (lpc21x4 in this case) containing the startup code and the port etc. definitions for this controller is loaded. Further, the compiler uses a linker script which fits the needs of this controller.
  
 
The result of the compiler is a .hex file which can be programmed by the NXP flash programming utility.
 
The result of the compiler is a .hex file which can be programmed by the NXP flash programming utility.
 +
 +
When using a board like the mbed (http://mbed.org) which is cortex-m3 based.  Another ARM core but uses only thumb/thumb2 instructions not ARM/thumb instructions.  A few subtle differences, first building fpc
 +
 +
<syntaxhighlight lang="bash">make clean buildbase installbase CROSSINSTALL=1 OS_TARGET=embedded CPU_TARGET=arm SUBARCH=armv7m</syntaxhighlight>
 +
 +
Second when compiling your program
 +
 +
<syntaxhighlight lang="bash">fpc -Parm -Tembedded -Wplpc1768 -Cparmv7m myprogram.pp</syntaxhighlight>
 +
 +
The -Cparmv7m option causes thumb2 code to be generated instead of the default (ARM based), probably not a bad idea to use the -Cp for processors using ARM instructions as well.  -Wp as with the example above specifies the specific target, in this case microcontroller, to build for.
 +
 +
=== Nordic nRF51822 example ===
 +
 +
See the [[micro:bit]] page.
  
 
=== Adding new controllers ===
 
=== Adding new controllers ===
 +
 +
Adding a new controller type requires basically three steps: first, extend the compiler so it knows about the name of the controller then add a linker script and finally create an RTL unit with the register definitions and the startup code.
 +
 +
==== Add the controller type to the compiler ====
 +
This is done in the file compiler/arm/cpuinfo.pas
 +
Here you need to add an identifier for the controller in the tcontrollertype enum
 +
At the same time you must update the embedded_controllers array. The array holds information about the amount of flash and sram in the controller, and what rtl unit should be included by default when compiling for that controller.
 +
 +
''Note: Make sure the string of the two arrays are long enough to contain the strings you write''
 +
 +
==== Add the linker script to the compiler ====
 +
Adding a linker script consists of adding the controllertype enum identifier to the case statement in compiler/systems/t_embed.pas If this is not done the compiler will generate an internalerror
 +
 +
==== Create an RTL unit with startup code and register definitions ====
 +
Creating an RTL unit means creating a unit that'll automatically be used in a project compiled for the given controller type. This unit should supply an entry point and basic initialization code. Enough to get the controller running
 +
 +
This unit, which must be named the same as the string written in the controllerunitstr field in the embedded_controllers array, goes into the directory rtl/embedded/arm/ where there are some examples already
 +
 +
After that the rtl/embedded Makefile.fpc should be modified, and rebuilt so it also builds the newly added rtl unit
 +
 +
== AVR ==
 +
See the [[AVR]] wiki page.
 +
 +
== Mipsel ==
 +
See the [[TARGET Embedded Mipsel]] wiki page.
 +
 +
== Xtensa ==
 +
See the [[Xtensa]] wiki page.
 +
 +
== Z80 ==
 +
See the [[Z80]] wiki page.
 +
 +
== Useful links ==
 +
* http://de.wikipedia.org/wiki/Intel_HEX
 +
* http://www.nxp.com/products/microcontrollers/support/software_download/lpc2000/
 +
* http://www.nxp.com/acrobat_download/usermanuals/UM10114_3.pdf
 +
* Jim Lynch: Using Open Source Tools for AT91SAM7 Cross Development - Revision B http://www.atmel.com/dyn/resources/prod_documents/atmel_tutorial_source.zip
 +
 +
== See Also ==
 +
* [[Small Virtual Machines#WinXp_virtual_machine]] as have '''simple''' example for Teensy.  '''Files released here:''' [[http://turbocontrol.com/simpleteensy.htm]]
 +
 +
[[Category:Embedded]]
 +
[[Category:Microcontrollers]]
 +
[[Category:FPC]]

Revision as of 12:28, 27 April 2020

English (en) español (es) 中文(中国大陆)‎ (zh_CN) 中文(台灣)‎ (zh_TW)

The embedded target is still under development and only a few controller families are supported. These are ARM (several architectures), AVR, Pic32mx (Mipsel), Xtensa (ESP32) and Z80. The embedded target targets systems are without any operating system and typically only have several kBs of RAM and several dozens of kB of flash. A typical target is the LPC family of NXP with popular members like the LPC2124 with 16 kB RAM and 256 kB flash using the ARM7 instruction set.

Embedded port

Status

  • best support is available in svn trunk version
  • compilers are working, register definitions are available, but libs for peripheral's access are rare to non-existing. Hardware can be accessed via hardware registers.
  • Not all controllers of each family are supported. If you're interested in support for further controllers, please subscribe to the fpc-devel mailing list and write a mail so adding the support can be discussed

ARM Embedded

Build

Get latest FPC from svn:

svn co http://svn.freepascal.org/svn/fpc/trunk fpc

Get arm-embedded binutils.

For windows, they are available at http://svn.freepascal.org/svn/fpcbuild/binaries/i386-win32. You can either checkout the whole directory with or download only arm-embedded-ar.exe, arm-embedded-as.exe, arm-embedded-ld.exe, arm-embedded-strip.exe, arm-embedded-objdump.exe and arm-embedded-objcopy.exe manually. Put these utils in a directory included in your path.

To build binutils from sources http://wiki.lazarus.freepascal.org/Binutils has instructions, for example, ./configure --target=arm-linux --prefix=/opt/embarm/ --program-prefix=arm-embedded- --disable-werror, has been known to work on binutils 2.21.1 to build the binaries in the form that the fpc target embedded build desires.

Build FPC for arm-embedded (OABI):

cd fpc
make clean buildbase installbase CROSSINSTALL=1 OS_TARGET=embedded CPU_TARGET=arm SUBARCH=armv4

This builds only the compiler and the RTL instead of the whole FPC. Because of the limited capabilities of the embedded systems supposed to be used, building all packages is not useful. However, one must be careful to avoid overwriting an existing arm compiler on the system. If this is the case, INSTALL_PREFIX should be used to install into a different directory and switch between those.

SUBARCH is required and should match your target processor, e.g.:

  • for the LPC 21xx parts which are ARM7TDMI (not to be confused with armv7!) based use SUBARCH=armv4
  • for cortex-m3 parts (stellaris, stm32, etc) use SUBARCH=armv7m
  • for cortex-m devices that support DSP extensions use SUBARCH=armv7em. The compiler does not yet support the cortex-m* FPU
  • for cortex-m0 devices use -Cparmv6m

NXP LPC2124 example

Below you find a simple example program for the LPC2124 microcontroller, save it as tled1.pp to follow the description. The program is made for development boards like the LPC-WEB from OLIMEX (http://www.olimex.com/dev/lpc-e2124.html). When you press button 1, led 1 lights for a certain time, same for button 2 and led 2.

procedure Wait(d : dword);
begin
  while d<>0 do
    dec(d);
end;

begin
  { initialize PLL }
  InitPLL(2,1);

  { initialize LEDs }
  { port 0.8: output }
  TBitvector32(GPIO0_IODIR)[8]:=1;
  { port 0.10: output }
  TBitvector32(GPIO0_IODIR)[10]:=1;

  { turn off both LEDs }
  TBitvector32(GPIO0_IOSET)[8]:=1;
  TBitvector32(GPIO0_IOSET)[10]:=1;

  { initialize button inputs }
  { port 0.9: input }
  TBitvector32(GPIO0_IODIR)[9]:=0;
  { port 0.15: input }
  TBitvector32(GPIO0_IODIR)[15]:=0;

  { endless loop}
  while true do
    begin

      { button 1 pressed }
      if TBitvector32(GPIO0_IOPIN)[15]=0 then
        begin
          { turn on LED, inverse logic }
          TBitvector32(GPIO0_IOCLR)[8]:=1;
          { wait }
          Wait(500000);
          {  turn off LED, inverse logic }
          TBitvector32(GPIO0_IOSET)[8]:=1;
      end;

      { button 2 pressed }
      if TBitvector32(GPIO0_IOPIN)[9]=0 then
        begin
          { turn on LED, inverse logic }
          TBitvector32(GPIO0_IOCLR)[10]:=1;
          { wait }
          Wait(500000);
          { turn off LED, inverse logic }
          TBitvector32(GPIO0_IOSET)[10]:=1;
      end;
    end;
end.

If FPC for arm-embedded is installed as described above, the program can be compiled by

fpc -Parm -Tembedded -Wplpc2124 tled1.pp
-Parm

tells the compiler to compile for arm.

-Tembedded

tells the compiler to compile for the embedded target.

-Wplpc2124

tells the compiler to compile for the NXP LPC 2124. This has two effects: first, a unit (lpc21x4 in this case) containing the startup code and the port etc. definitions for this controller is loaded. Further, the compiler uses a linker script which fits the needs of this controller.

The result of the compiler is a .hex file which can be programmed by the NXP flash programming utility.

When using a board like the mbed (http://mbed.org) which is cortex-m3 based. Another ARM core but uses only thumb/thumb2 instructions not ARM/thumb instructions. A few subtle differences, first building fpc

make clean buildbase installbase CROSSINSTALL=1 OS_TARGET=embedded CPU_TARGET=arm SUBARCH=armv7m

Second when compiling your program

fpc -Parm -Tembedded -Wplpc1768 -Cparmv7m myprogram.pp

The -Cparmv7m option causes thumb2 code to be generated instead of the default (ARM based), probably not a bad idea to use the -Cp for processors using ARM instructions as well. -Wp as with the example above specifies the specific target, in this case microcontroller, to build for.

Nordic nRF51822 example

See the micro:bit page.

Adding new controllers

Adding a new controller type requires basically three steps: first, extend the compiler so it knows about the name of the controller then add a linker script and finally create an RTL unit with the register definitions and the startup code.

Add the controller type to the compiler

This is done in the file compiler/arm/cpuinfo.pas Here you need to add an identifier for the controller in the tcontrollertype enum At the same time you must update the embedded_controllers array. The array holds information about the amount of flash and sram in the controller, and what rtl unit should be included by default when compiling for that controller.

Note: Make sure the string of the two arrays are long enough to contain the strings you write

Add the linker script to the compiler

Adding a linker script consists of adding the controllertype enum identifier to the case statement in compiler/systems/t_embed.pas If this is not done the compiler will generate an internalerror

Create an RTL unit with startup code and register definitions

Creating an RTL unit means creating a unit that'll automatically be used in a project compiled for the given controller type. This unit should supply an entry point and basic initialization code. Enough to get the controller running

This unit, which must be named the same as the string written in the controllerunitstr field in the embedded_controllers array, goes into the directory rtl/embedded/arm/ where there are some examples already

After that the rtl/embedded Makefile.fpc should be modified, and rebuilt so it also builds the newly added rtl unit

AVR

See the AVR wiki page.

Mipsel

See the TARGET Embedded Mipsel wiki page.

Xtensa

See the Xtensa wiki page.

Z80

See the Z80 wiki page.

Useful links

See Also