Difference between revisions of "Talk:How to use a TrayIcon"

From Free Pascal wiki
Jump to navigationJump to search
Line 2: Line 2:
  
 
== Linux Problems ==
 
== Linux Problems ==
 +
=== Background ===
 +
Recently, changes is some Linux Desktops have threatened the TrayIcon Lazarus Component. Apparently driven by concern that the Linux System Tray (of which the TrayIcon is an example) is being used in overly complicated User Interfaces and is too hard to maintain at the Desktop level. Some major players have disabled the System Tray altogether, some have replaced it with a simpler model and some still support it.
 +
In summary, there are currently three ways that you will see and interact with what might be called a System Tray Icon -
 +
* The old System Tray Model, as provided by Lazarus makes a small icon visible, a Left Click is passed to a click handler, a Right Click can invoke a popup menu.
 +
* The Libappindicator3, seems to be based on (the late) Unity Desktop and work done by the KDE people, perhaps. In Lazarus, only shows the Icon if a Popup Menu is assigned and does not invoke a Click Handler. Only interaction possible is the Popup Menu.
 +
* AppNotifier - apparently intended to be a replacement for SystemTray, works in most Distributions based on newer Desktops. Not supported in Lazarus.
 +
 +
 +
=== State of Play ===
 +
A programmer intending to use the Lazarus TrayIcon needs to consider how it will be used. What is possible depends on the Distribution and Desktop used.
 +
* Providing a Popup Menu only. This mode may be best bet for a new design, seems likely it will work widely in the medium future. Use libappindicator3.
 +
* Catch Left Clicks with no popup menu. This mode is best implemented by the Old System Tray model and won't work with newer releases of several major distributions (such as Ubuntu, RedHat and Suse) without a third party add on that may, or may not be available in the immediate future. My tests TopIconsPlus but there are several similar Gnome Extensions. Note that an end user may be put off the process of installing and enabling these extensions.
 +
* Catch Left Clicks and display a Popup Menu with Right Clicks.
 +
 
In conjunction with bugs 0035723 and 35983 here is a table of what works with (Fixes) release 61820 and 61821 -
 
In conjunction with bugs 0035723 and 35983 here is a table of what works with (Fixes) release 61820 and 61821 -
  

Revision as of 02:20, 5 October 2019


Linux Problems

Background

Recently, changes is some Linux Desktops have threatened the TrayIcon Lazarus Component. Apparently driven by concern that the Linux System Tray (of which the TrayIcon is an example) is being used in overly complicated User Interfaces and is too hard to maintain at the Desktop level. Some major players have disabled the System Tray altogether, some have replaced it with a simpler model and some still support it. In summary, there are currently three ways that you will see and interact with what might be called a System Tray Icon -

  • The old System Tray Model, as provided by Lazarus makes a small icon visible, a Left Click is passed to a click handler, a Right Click can invoke a popup menu.
  • The Libappindicator3, seems to be based on (the late) Unity Desktop and work done by the KDE people, perhaps. In Lazarus, only shows the Icon if a Popup Menu is assigned and does not invoke a Click Handler. Only interaction possible is the Popup Menu.
  • AppNotifier - apparently intended to be a replacement for SystemTray, works in most Distributions based on newer Desktops. Not supported in Lazarus.


State of Play

A programmer intending to use the Lazarus TrayIcon needs to consider how it will be used. What is possible depends on the Distribution and Desktop used.

  • Providing a Popup Menu only. This mode may be best bet for a new design, seems likely it will work widely in the medium future. Use libappindicator3.
  • Catch Left Clicks with no popup menu. This mode is best implemented by the Old System Tray model and won't work with newer releases of several major distributions (such as Ubuntu, RedHat and Suse) without a third party add on that may, or may not be available in the immediate future. My tests TopIconsPlus but there are several similar Gnome Extensions. Note that an end user may be put off the process of installing and enabling these extensions.
  • Catch Left Clicks and display a Popup Menu with Right Clicks.

In conjunction with bugs 0035723 and 35983 here is a table of what works with (Fixes) release 61820 and 61821 -

Distro See Icon LeftClick RightClick See Icon with no menu LeftClick with no menu
18.04 Mate 61820 Yes Menu Panel Menu No
18.04 Mate 61821 Yes Click Yes Click
18.04 Gnome3 61820 Yes Menu Menu
18.04 Gnome3 61821 No , ,
19.04 Gnome3 61820 Yes Menu Menu
19.04 Gnome3 61821 No , ,
Fedora 30 61820 Yes Menu Menu
Fedora 30 61821 Yes Click Menu but in random location.
OpenSuse Leap 61820 Yes Menu Menu
OpenSuse Leap 61821 Yes Click Menu but in random location.
Debian 9.9 (all) Yes Click Menu
Mint 19.2 Cinnamon 61820 Yes Menu Menu
Mint 19.2 Cinnamon 61821 Yes Click Menu
Mageia 7.1 Gnome 61820 Yes Menu Menu
Mageia 7.1 Gnome 61821 No

Fedora 30 and OpenSuse Leap 15 has TopIcons installed, without it no TrayIcon shows in any model. Both confirm tightly Gnome's "No SystemTray Please".

Debian - Thats Plasma and Gnome3, both versions of test app.

Mageia may work if TopIcons is installed but I had problems doing so and its almost certain it, too, would suffer the random menu placement issue because it uses Wayland. Mageia may have any number of other Desktops installed, I'll try and find out which are the more popular (my network allowance is taking a bit of a hiding at present).

Note that the current, mainstream, Fedora and Ubuntu mixes are unusable in 61821 and later. The only downside of the 61820 and earlier is that libappindicator3 does not differentiate between left and right click. Given that the push at present is to "simplify" the SystemTray/AppNotifier model, perhaps thats intentional. Gnome's hostility to the older SystemTray model is well know, and, perhaps sadly, likely to prevail. And that means more systems will be unusable using the old SystemTray/Libappindicator (1) model.

Legacy

Could someone expand on this comment "The image of the icon can be altered using a HICON handle. "? As a newbie I don't really know what a HICON handle is or how to use it.

HICON is a widgetset Icon Handle. The TrayIcon component is quite old, and when I first wrote it there was no real support for the TIcon component is Lazarus, so you could use directly an icon handle instead. Now you should just go for TIcon.
--Felipe Monteiro de Carvalho 08:41, 25 July 2010 (CEST)

I have found it quite hard to generate icons that will load and display using

SysTrayIcon.LoadFromFile('file.ico');
SysTrayIcon.Show;
Should work.
--Felipe Monteiro de Carvalho 08:41, 25 July 2010 (CEST)

I found that the format of the icon in Windows XP is fussy. The icon will only display if it is saved with the parameters "8bpp,1-bit alpha,256-slot palette" in gimp for example.

Ummm ... that's probably something related to the Free Pascal Windows Icon reading capabilities. 24-bits RGB should work too. Doesn't it work? You can create a test project and attach it to a bug report in the bug tracker. It would also be great if you could find out which formats work and which don't and write this in the wiki.
--Felipe Monteiro de Carvalho 08:41, 25 July 2010 (CEST)

The next challenge is to modify an icon in memory and then display it. I'm sure my method isn't exactly correct but maybe it will help others. First I tried to create a tbitmap and load an icon into it but fails. Also any attempt to do a SysTrayIcon.Icon.LoadFromBitMapHandles() seems to result in a blank icon.

In the end I did this which works for a 32x32 icon

MemIcon:=TIcon.Create;
MemIcon.LoadFromLazarusResource('blankicon');
PByte:=MemIcon.RawImage.Data+100;
//PByte now points to the first byte of the first pixel.
//Set the top left pixel red
Pbyte^:=$00; //green
(PByte+1)^:=$FF;  //red
(PByte+2)^:=$00:  //blue
SysTrayIcon.Icon:=MemIcon;
SysTrayIcon.Show:

Now I have an icon in my system tray with a red dot in the top left corner. Each pixel uses 3 bytes so a procedure like this works to manipulate each 32x32 pixel

procedure TForm1.SetIconPixel(PTRIcon:PIcon;xpos,ypos,red,green,blue:byte);
var
  PByte: ^Byte;
begin
  {xpos and ypos are 0 to 31}
  PByte:=PtrIcon^.RawImage.Data+100+((xpos+(ypos*32))*3);
  if PByte<PtrIcon^.RawImage.Data+PtrIcon^.RawImage.DataSize-1 then
  begin
    Pbyte^:=green;
    (PByte+1)^:=red;
    (PByte+2)^:=blue;
  end;
end;

I have no idea what the first 100 bytes do.

For a 16x16 icon there is no extra 100 bytes and the colour order is different. Same code for a 16x16 icon

procedure TForm1.SetIconPixel(PTRIcon:PIcon;xpos,ypos,red,green,blue:byte);
var
  PByte: ^Byte;
begin
  {xpos and ypos are 0 to 15}
  PByte:=PtrIcon^.RawImage.Data+((xpos+(ypos*16))*3);
  if PByte<PtrIcon^.RawImage.Data+PtrIcon^.RawImage.DataSize-1 then
  begin
    Pbyte^:=blue;
    (PByte+1)^:=green;
    (PByte+2)^:=red;
  end;
end;

To use this procedure you have to load an icon file or resource into a ticon send a pointer to the ticon and the xpos, ypos and colour that you want to the procedure copy the icon to the systrayicon show it

like this

MemIcon:=TIcon.Create;
MemIcon.LoadFromFile('16x16.ico');
//draw a black square in the middle
for x:=6 to 9 do
  for y:=6 to 9 do
    SetIconPixel(@MemIcon,x,y,0,0,0);
SystrayIcon.Icon:=MemIcon;
SystrayIcon.Show;

dieselnutjob

Now about setting an icon pixel, there is a much better way of doing this. The RawImage is completely dependent on the pixel format you are using, but you can also use TLazIntfImage, which is format independent and very fast:
 uses Graphics, IntfGraphics;

 var
   TempIntfImg: TLazIntfImage;
   ImgHandle,ImgMaskHandle: HBitmap;
   px, py: Integer;
   TempBitmap: TBitmap;
 begin
   TempIntfImg:=TLazIntfImage.Create(16,16);
   TempBitmap:=TBitmap.Create;

   // Here you can set the pixels
   for py:=0 to TempIntfImg.Height-1 do
     for px:=0 to TempIntfImg.Width-1 do
       SrcIntfImg.Colors[px,py] := clRed;

   // Now you can copy it to a TBitmap
   TempIntfImg.CreateBitmaps(ImgHandle,ImgMaskHandle,false);
   TempBitmap.Handle:=ImgHandle;
   TempBitmap.MaskHandle:=ImgMaskHandle;

   // And copy the TBitmap to your Icon
   SystrayIcon.Icon.Assign(TempBitmap);

   TempIntfImg.Free;
   TempBitmap.Free;
 end;
That should do it and very 100% format independent.
--Felipe Monteiro de Carvalho 08:40, 25 July 2010 (CEST)

I can't get TempIntfImg.CreateBitmaps(ImgHandle,ImgMaskHandle,false) to actually run getting FPImageException: Failed to create handles bug 0017031 created dieselnutjob

For reference, I added a working code here: TrayIcon#Example_2_-_Creating_the_icon_with_TLazIntfImage
--Felipe Monteiro de Carvalho 17:38, 26 July 2010 (CEST)

Your code works well. I tried it in Linux and Windows XP. just removed the unnecessary "FPRed: TFPColor;" variable thanks dieselnutjob

I am getting a new problem now. With the example code on Linux the red box is scrambled. for an example see http://christiantena.pwp.blueyonder.co.uk/images/redbox.jpg This is laptop running Debian Lenny with KDE desktop. Lazarus is 0.9.28.2-0 beta Date 2009-10-27 FPC 2.2.4 thanks dieselnutjob