Ultibo Quick Start

Overview

- Use a PC to install PINN Lite onto a 8 GB SD card. - Set up Zero hardware (similar to this, but a little different as need USB hub and several micro to standard cables). PINN works with wireless keyboards and mice (unlike NOOBS)!
- Power up and select Language on PINN, connect WiFi, and then select LibreELEC and Raspbian Lite to install.
- Note: the rest takes about 47 minutes on a RPi3B

Our goal is to use a Raspberry Pi Zero Wireless With Headers (with Sense HAT documented more here and here and here).

- Boot up your Raspberry Pi, configure Internet access (if using WiFi)
- Select your Language near the bottom of the screen
- Make sure Raspbian Lite is the only OS selected, then click the Install button.
- When reboots delay login as Raspbian does updates automatically by itself, login (user pi and password raspberry)
- We are basically following the "headless" set up here.
- Enter the following lines (without bold comment text) in the terminal:
sudo sh -c "apt update && apt dist-upgrade && apt autoremove"
sudo raspi-config (to select timezone and other options)
sudo reboot
(login)
sudo apt install libgtk2.0-dev libghc-x11-dev binutils-arm-none-eabi (temp to install 170 packages until script is fixed so don't need these)
wget https://github.com/ultibohub/Tools/releases/latest/download/ultiboinstaller.sh
chmod u+rx ultiboinstaller.sh
./ultiboinstaller.sh (confirm don't want Lazarus, do want to build the Hello World examples)
sudo poweroff (wait for LED off before remove power)

See also

• Ultibo_core
• EasyUltibo - where this wiki page started, more standard FPC & Python for SenseHat