Difference between revisions of "User Changes Trunk"

From Free Pascal wiki
m (DB.TFieldType: new types added)
 
(11 intermediate revisions by 6 users not shown)
Line 1: Line 1:
 
== About this page==
 
== About this page==
  
Listed below are intentional changes made to the FPC compiler (trunk) since the [[User_Changes_3.2|next upcoming release]] that may break existing code. The list includes reasons why these changes have been implemented, and suggestions for how you might adapt your code if you find that previously working code has been adversely affected by these recent changes.  
+
Listed below are intentional changes made to the FPC compiler (trunk) since the [[User_Changes_3.2|previous release]] that may break existing code. The list includes reasons why these changes have been implemented, and suggestions for how you might adapt your code if you find that previously working code has been adversely affected by these recent changes.  
  
 
The list of new features that do not break existing code can be found [[FPC_New_Features_Trunk|here]].
 
The list of new features that do not break existing code can be found [[FPC_New_Features_Trunk|here]].
Line 57: Line 57:
 
* '''New behaviour''': By default, the compiler no longer automatically converts regular arrays to dynamic arrays in any syntax mode.
 
* '''New behaviour''': By default, the compiler no longer automatically converts regular arrays to dynamic arrays in any syntax mode.
 
* '''Reason''': When passing a dynamic array by value, modifications to its contents by the callee are also visible on the caller side. However, if an array is implicitly converted to a dynamic array, the result is a temporary value and hence changes are lost. This issue came up when adding [https://bugs.freepascal.org/view.php?id=35580 TStream.Read() overloads].
 
* '''Reason''': When passing a dynamic array by value, modifications to its contents by the callee are also visible on the caller side. However, if an array is implicitly converted to a dynamic array, the result is a temporary value and hence changes are lost. This issue came up when adding [https://bugs.freepascal.org/view.php?id=35580 TStream.Read() overloads].
* '''Remedy''': Either change the code so it no longer assigns regular arrays to dynamic arrays, or add ''{$modeswitch arraytodynarray}'' a
+
* '''Remedy''': Either change the code so it no longer assigns regular arrays to dynamic arrays, or add ''{$modeswitch arraytodynarray}''  
 
* '''Example''': this program demonstrates the issue that appeared with the TStream.Read() overloads that were added (originally, only the the version with the untyped variable existed)
 
* '''Example''': this program demonstrates the issue that appeared with the TStream.Read() overloads that were added (originally, only the the version with the untyped variable existed)
  
Line 135: Line 135:
 
* '''Remedy''': If you relied on ''Comp'' being able to be passed to ''Int64'' variables/parameters either include typecasts or add overloads for ''Comp''.
 
* '''Remedy''': If you relied on ''Comp'' being able to be passed to ''Int64'' variables/parameters either include typecasts or add overloads for ''Comp''.
 
* '''svn''': 43775
 
* '''svn''': 43775
 +
 +
==== Additional ${include %xxx%} directives ====
 +
* '''Old behaviour:''' The additional directives would have returned the content of an environment variable of the same name if it had existed, otherwise an empty string. 
 +
* '''New behaviour:''' The {$include %xxx%} directive now recognizes these additional internal variables:
 +
** <syntaxhighlight lang="pascal" inline>{$include %currentRoutine%}</syntaxhighlight> expands to the name of the current routine ([[string]]).
 +
** <syntaxhighlight lang="pascal" inline>{$include %dateYear%}</syntaxhighlight> expands to the year number at time of compilation ([[Smallint|smallInt]]).
 +
** <syntaxhighlight lang="pascal" inline>{$include %dateMonth%}</syntaxhighlight> expands to the day number in month at time of compilation ([[Shortint|shortInt]]).
 +
** <syntaxhighlight lang="pascal" inline>{$include %timeHour%}</syntaxhighlight> expands to the number of seconds at time of compilation ([[Shortint|shortInt]]).
 +
** <syntaxhighlight lang="pascal" inline>{$include %timeMinute%}</syntaxhighlight> expands to the number of minutes at time of compilation ([[Shortint|shortInt]]).
 +
** <syntaxhighlight lang="pascal" inline>{$include %timeSecond%}</syntaxhighlight> expands to the number of seconds at time of compilation ([[Shortint|shortInt]]).
 +
* '''Reason:''' Adds to the existing {$include %fileName%}, {$include %line%} and {$include %date%} directives and is handy for debugging. 
 +
* '''Remedy:''' You can no longer name and use environment variable expansion with any of these names.
 +
* '''svn:''' 30873 (current routine), 38329 (date and time)
 +
 +
==== Routines that only differ in result type ====
 +
* '''Old behaviour:''' It was possible to declare routines (functions/procedures/methods) that only differ in their result type.
 +
* '''New behaviour:''' It is no longer possible to declare routines that only differ in their result type.
 +
* '''Reason:''' It makes no sense to allow this as there are situations where the compiler will not be able to determine which function to call (e.g. a simple call to a function ''Foo'' without using the result).
 +
* '''Remedy:''' Correctly declare overloads.
 +
* '''Notes:'''
 +
** As the JVM allows covariant interface implementations such overloads are still allowed inside classes for the JVM target.
 +
** Operator overloads (especially assignment operators) that only differ in result type are still allowed.
 +
* '''svn:''' 45973
  
 
=== Unit changes ===
 
=== Unit changes ===
Line 145: Line 168:
 
* '''Remedy:''' If you implemented your own variant manager then adjust the method signature and handle the range parameter accordingly.
 
* '''Remedy:''' If you implemented your own variant manager then adjust the method signature and handle the range parameter accordingly.
 
* '''svn:''' 41570
 
* '''svn:''' 41570
 +
 +
==== System - buffering of output to text files ====
 +
 +
* '''Old behaviour:''' Buffering was disabled only for output to text files associated with character devices (Linux, BSD targets, OS/2), or for output to Input, Output and StdErr regardless of their possible redirection (Win32/Win64, AIX, Haiku, BeOS, Solaris).
 +
* '''New behaviour:''' Buffering is disabled for output to text files associated with character devices, pipes and sockets (the latter only if the particular target supports accessing sockets as files - Unix targets).
 +
* '''Reason for change:''' The same behaviour should be ensured on all supported targets whenever possible. Output to pipes and sockets should be performed immediately, equally to output to character devices (typically console) - in case of console users may be waiting for the output, in case of pipes and sockets some other program is waiting for this output and buffering is not appropriate. Seeking is not attempted in SeekEof implementation for files associated with character devices, pipes and sockets, because these files are usually not seekable anyway (instead, reading is performed until the end of the input stream is reached).
 +
* '''Remedy:''' Buffering of a particular file may be controlled programmatically / changed from the default behaviour if necessary. In particular, perform TextRec(YourTextFile).FlushFunc:=nil immediately after opening the text file (i.e. after calling Rewrite or after starting the program in case of Input, Output and StdErr) and before performing any output to this text to enable buffering using the default buffer, or TextRec(YourTextFile).FlushFunc:=TextRec(YourTextFile).FileWriteFunc to disable buffering.
 +
* '''svn:''' 46863
  
 
==== 64-bit values in OleVariant ====
 
==== 64-bit values in OleVariant ====
Line 168: Line 199:
 
* '''svn:''' 44714
 
* '''svn:''' 44714
  
==== Naming of threads ====
+
==== CocoaAll ====
 
+
===== CoreImage Framework Linking =====
* '''Old behaviour:''' Functionality of ''TThread.NameThreadForDebugging'' wasn't implemented.
+
* '''Old behaviour''': Starting with FPC 3.2.0, the ''CocoaAll'' unit linked caused the ''CoreImage'' framework to be linked.
* '''New behaviour:''' Calling ''TThread.NameThreadForDebugging'' names your thread.
+
* '''New behaviour''': The ''CocoaAll'' unit no longer causes the ''CoreImage'' framework to be linked.
* '''Reason for change:''' Easier debugging of multithreading code (visible in various tools) and Delphi compatibility.
+
* '''Reason for change''': The ''CoreImage'' framework is not available on OS X 10.10 and earlier (it's part of ''QuartzCore'' there, and does not exist at all on some even older versions).
* '''Remedy:''' Currently implemented for Windows, Linux and Android. Read documentation as every platform has its own restrictions.
+
* '''Remedy''': If you use functionality that is only available as part of the separate ''CoreImage'' framework, explicitly link it in your program using the ''{$linkframework CoreImage}'' directive.
* '''svn:''' 45160, 45206, 45233
+
* '''svn''': 45767
  
 
==== DB ====
 
==== DB ====
Line 182: Line 213:
 
* '''Reason for change:''' native support for new data types introduced in MS SQL Server 2008 (like DATE, TIME, DATETIME2). FreeTDS client library version 0.95 or higher required.
 
* '''Reason for change:''' native support for new data types introduced in MS SQL Server 2008 (like DATE, TIME, DATETIME2). FreeTDS client library version 0.95 or higher required.
 
* '''svn''': 42737
 
* '''svn''': 42737
 +
 +
===== DB.TFieldType: new types added =====
 +
* '''Old behaviour:''' .
 +
* '''New behaviour:''' Some of new Delphi field types were added (ftOraTimeStamp, ftOraInterval, ftLongWord, ftShortint, ftByte, ftExtended) + corresponding classes TLongWordField, TShortIntField, TByteField
 +
* '''Reason for change:''' align with Delphi and open space for support of short integer and unsigned integer data types
 +
* '''svn''': 47217
 +
 +
==== DaemonApp ====
 +
===== TDaemonThread =====
 +
* '''Old behaviour:''' The virtual method ''TDaemonThread.HandleControlCode'' takes a single ''DWord'' parameter containing the control code.
 +
* '''New behaviour:''' The virtual method ''TDaemonThread.HandleControlCode'' takes three parameters of which the first is the control code, the other two are an additional event type and event data.
 +
* '''Reason for change:''' Allow for additional event data to be passed along which is required for comfortable handling of additional control codes provided on Windows.
 +
* '''svn''': 46327
 +
 +
===== TDaemon =====
 +
* '''Old behaviour:''' If an event handler is assigned to ''OnControlCode'' then it will be called if the daemon receives a control code.
 +
* '''New behaviour:''' If an event handler is assigned to ''OnControlCodeEvent'' and that sets the ''AHandled'' parameter to ''True'' then ''OnControlCode'' won't be called, otherwise it will be called if assigned.
 +
* '''Reason for change:''' This was necessary to implement the handling of additional arguments for control codes with as few backwards incompatible changes as possible.
 +
* '''svn''': 46327
 +
 +
==== FileInfo ====
 +
* '''Old behaviour:''' The ''FileInfo'' unit is part of the ''fcl-base'' package.
 +
* '''New behaviour:''' The ''FileInfo'' unit is part of the ''fcl-extra'' package.
 +
* '''Reason for change:''' Breaks up a cycle in build dependencies after introducing a RC file parser into ''fcl-res''. This should only affect users that compile trunk due to stale PPU files in the old location or that use a software distribution that splits the FPC packages (like Debian).
 +
* '''svn''': 46392
 +
 +
== AArch64/ARM64 ==
 +
=== ''{''-style comments no longer supported in assembler blocks ===
 +
* '''Old behaviour''': The ''{'' character started a comment in assembler blocks, like in Pascal
 +
* '''New behaviour''': The ''{'' character now has a different meaning in the AArch64 assembler reader, so it can no longer be used to start comments.
 +
* '''Reason for change''': Support has been added for register sets in the AArch64 assembler reader (for the ld1/ld2/../st1/st2/... instructions), which also start with ''{''.
 +
* '''Remedy''': Use ''(*'' or ''//'' to start comments
 +
* '''svn''': 47116
 +
  
 
== Darwin/iOS ==
 
== Darwin/iOS ==

Latest revision as of 14:36, 27 October 2020

About this page

Listed below are intentional changes made to the FPC compiler (trunk) since the previous release that may break existing code. The list includes reasons why these changes have been implemented, and suggestions for how you might adapt your code if you find that previously working code has been adversely affected by these recent changes.

The list of new features that do not break existing code can be found here.

Please add revision numbers to the entries from now on. This facilitates moving merged items to the user changes of a release.

All systems

Language Changes

Precedence of the IS operator changed

  • Old behaviour: The IS operator had the same predence as the multiplication, division etc. operators.
  • New behaviour: The IS operator has the same predence as the comparison operators.
  • Reason: Bug, see [1].
  • Remedy: Add parenthesis where needed.

Implementation Changes

Property field access lists no longer allows classes

  • Old behaviour: A field access list for a property is allowed to contain implicit dereferences in the form of fields of class instances.
  • New behaviour: A field access list for a property must only contain record or (TP style) object fields.
  • Reason:
    • Delphi compatibility
    • This resulted in an internal error for published properties
  • Remedy:
    • Switch the fields to records or objects
    • Use a method with inline modifier that will result in similar performance
  • svn: 40656
  • Example: The following code now fails:
unit Test;
{$mode objfpc}

interface

type
  TTest1 = class
    Field: String;
  end;

  TTest2 = class
  private
    fTest1: TTest1;
  public
    property Prop: String read fTest1.Field; // Error "Record or object type expected"
  end;

implementation

end.

Disabled default support for automatic conversions of regular arrays to dynamic arrays

  • Old behaviour: In FPC and ObjFPC modes, by default the compiler could automatically convert a regular array to a dynamic array.
  • New behaviour: By default, the compiler no longer automatically converts regular arrays to dynamic arrays in any syntax mode.
  • Reason: When passing a dynamic array by value, modifications to its contents by the callee are also visible on the caller side. However, if an array is implicitly converted to a dynamic array, the result is a temporary value and hence changes are lost. This issue came up when adding TStream.Read() overloads.
  • Remedy: Either change the code so it no longer assigns regular arrays to dynamic arrays, or add {$modeswitch arraytodynarray}
  • Example: this program demonstrates the issue that appeared with the TStream.Read() overloads that were added (originally, only the the version with the untyped variable existed)
{$mode objfpc}
type
  tdynarray = array of byte;

procedure test(var arr); overload;
begin
  pbyte(arr)[0]:=1;
end;

procedure test(arr: tdynarray); overload;
begin
  test[0]:=1;
end;

var
  regulararray: array[1..1] of byte;
begin
  regulararray[1]:=0;
  test(arr);
  writeln(arr[0]); // writes 0, because it calls test(tdynarr)
end.
  • svn: 42118

Range checking for enumeration constants in Delphi mode

  • Old behaviour: Out-of-range enumeration constants never caused an error in Delphi mode, because very early versions of Delphi did not either.
  • New behaviour: Out-of-range enumeration constants cause an error in Delphi mode, even if range checking is disabled. Current Delphi versions (and even older ones, such as Delphi 7) behave the same.
  • Reason: Delphi-compatibility.
  • Remedy: Fix the range errors.
  • svn: 42272, 42275

Directive clause […] no longer useable with modeswitch PrefixedAttributes

  • Old behaviour: A function/procedure/method or procedure/method variable type could be followed by a directive clause in square brackets ([…]) that contains the directives for the routine or type (e.g. calling convention).
  • New behaviour: If the modeswitch PrefixedAttributes is enabled (which is the default in modes Delphi and DelphiUnicode) the directive clause in square brackets is no longer allowed.
  • Reason: As custom attributes are bound to a type/property in a way that looks ambiguous to a directive clause and this ambiguity is not easily solved in the parser it is better to disable this feature.
  • Remedy:
    • don't set (in non-Delphi modes) or disable modeswitch PrefixedAttributes (in Delphi modes) if you don't use attributes ({$modeswitch PrefixedAttributes-})
    • rework your directive clause:
// this
procedure Test; cdecl; [public,alias:'foo']
begin
end;

// becomes this
procedure Test; cdecl; public; alias:'foo';
begin
end;
  • svn: 42402

Type information contains reference to attribute table

  • Old behavior: The first field of the data represented by TTypeData is whatever the sub branch of the case statement for the type contains.
  • New behavior: The first field of the data represented by TTypeData is a reference to the custom attributes that are attributed to the type, only then the type specific fields follow.
  • Reason: Any type can have attributes, so it make sense to provide this is a common location instead of having to parse the different types.
  • Remedy:
    • If you use the records provided by the TypInfo unit no changes should be necessary (same for the Rtti unit).
    • If you directly access the binary data you need handle an additional Pointer field at the beginning of the TTypeData area and possibly correct the alignment for platforms that have strict alignment requirements (e.g. ARM or M68k).
  • svn: 42375

Explicit values for enumeration types are limited to low(longint) ... high(longint)

  • Old behavior: The compiler accepted every integer value as explicit enumeration value. The value was silently reduced to the longint range if it fell outside of that range
  • New behavior: The compiler throws an error (FPC mode) or a warning (Delphi mode) if an explicit enumeration value lies outside the longint range.
  • Reason: Type TEnum = (a = $ffffffff); resulted in an enum with size 1 instead of 4 as would be expected, because $ffffffff was interpreted as "-1".
  • Remedy: Add Longint typecasts to values outside the valid range of a Longint.

Comp as a type rename of Int64 instead of an alias

  • Old behavior: On non-x86 as well as Win64 the Comp type is declared as an alias to Int64 (Comp = Int64).
  • New behavior: On non-x86 as well as Win64 the Comp type is declared as a type rename of Int64 (Comp = type Int64).
  • Reason:
    • This allows overloads of Comp and Int64 methods/functions
    • This allows to better detect properties of type Comp
    • Compatibility with Delphi for Win64 which applied the same reasoning
  • Remedy: If you relied on Comp being able to be passed to Int64 variables/parameters either include typecasts or add overloads for Comp.
  • svn: 43775

Additional ${include %xxx%} directives

  • Old behaviour: The additional directives would have returned the content of an environment variable of the same name if it had existed, otherwise an empty string.
  • New behaviour: The {$include %xxx%} directive now recognizes these additional internal variables:
    • {$include %currentRoutine%} expands to the name of the current routine (string).
    • {$include %dateYear%} expands to the year number at time of compilation (smallInt).
    • {$include %dateMonth%} expands to the day number in month at time of compilation (shortInt).
    • {$include %timeHour%} expands to the number of seconds at time of compilation (shortInt).
    • {$include %timeMinute%} expands to the number of minutes at time of compilation (shortInt).
    • {$include %timeSecond%} expands to the number of seconds at time of compilation (shortInt).
  • Reason: Adds to the existing {$include %fileName%}, {$include %line%} and {$include %date%} directives and is handy for debugging.
  • Remedy: You can no longer name and use environment variable expansion with any of these names.
  • svn: 30873 (current routine), 38329 (date and time)

Routines that only differ in result type

  • Old behaviour: It was possible to declare routines (functions/procedures/methods) that only differ in their result type.
  • New behaviour: It is no longer possible to declare routines that only differ in their result type.
  • Reason: It makes no sense to allow this as there are situations where the compiler will not be able to determine which function to call (e.g. a simple call to a function Foo without using the result).
  • Remedy: Correctly declare overloads.
  • Notes:
    • As the JVM allows covariant interface implementations such overloads are still allowed inside classes for the JVM target.
    • Operator overloads (especially assignment operators) that only differ in result type are still allowed.
  • svn: 45973

Unit changes

System - TVariantManager

  • Old behaviour: TVariantManager.olevarfromint has a source parameter of type LongInt.
  • New behaviour: TVariantManager.olevarfromint has a source parameter of type Int64.
  • Reason for change: 64-bit values couldn't be correctly converted to an OleVariant.
  • Remedy: If you implemented your own variant manager then adjust the method signature and handle the range parameter accordingly.
  • svn: 41570

System - buffering of output to text files

  • Old behaviour: Buffering was disabled only for output to text files associated with character devices (Linux, BSD targets, OS/2), or for output to Input, Output and StdErr regardless of their possible redirection (Win32/Win64, AIX, Haiku, BeOS, Solaris).
  • New behaviour: Buffering is disabled for output to text files associated with character devices, pipes and sockets (the latter only if the particular target supports accessing sockets as files - Unix targets).
  • Reason for change: The same behaviour should be ensured on all supported targets whenever possible. Output to pipes and sockets should be performed immediately, equally to output to character devices (typically console) - in case of console users may be waiting for the output, in case of pipes and sockets some other program is waiting for this output and buffering is not appropriate. Seeking is not attempted in SeekEof implementation for files associated with character devices, pipes and sockets, because these files are usually not seekable anyway (instead, reading is performed until the end of the input stream is reached).
  • Remedy: Buffering of a particular file may be controlled programmatically / changed from the default behaviour if necessary. In particular, perform TextRec(YourTextFile).FlushFunc:=nil immediately after opening the text file (i.e. after calling Rewrite or after starting the program in case of Input, Output and StdErr) and before performing any output to this text to enable buffering using the default buffer, or TextRec(YourTextFile).FlushFunc:=TextRec(YourTextFile).FileWriteFunc to disable buffering.
  • svn: 46863

64-bit values in OleVariant

  • Old behaviour: If a 64-bit value (Int64, QWord) is assigned to an OleVariant its type is varInteger and only the lower 32-bit are available.
  • New behaviour: If a 64-bit value (Int64, QWord) is assigned to an OleVariant its type is either varInt64 or varQWord depending on the input type.
  • Reason for change: 64-bit values weren't correctly represented. This change is also Delphi compatible.
  • Remedy: Ensure that you handle 64-bit values correctly when using OleVariant.
  • svn: 41571

Classes TCollection.Move

  • Old behaviour: If a TCollection.Descendant called Move() this would invoke System.Move.
  • New behaviour: If a TCollection.Descendant called Move() this invokes TCollection.Move.
  • Reason for change: New feature in TCollection: move, for consistency with other classes.
  • Remedy: prepend the Move() call with the system unit name: System.move().
  • svn: 41795

Math Min/MaxSingle/Double

  • Old behaviour: MinSingle/MaxSingle/MinDouble/MaxDouble were set to a small/big value close to the smallest/biggest possible value.
  • New behaviour: The constants represent now the smallest/biggest positive normal numbers.
  • Reason for change: Consistency (this is also Delphi compatibility), see https://bugs.freepascal.org/view.php?id=36870.
  • Remedy: If the code really depends on the old values, rename them and use them as renamed.
  • svn: 44714

CocoaAll

CoreImage Framework Linking
  • Old behaviour: Starting with FPC 3.2.0, the CocoaAll unit linked caused the CoreImage framework to be linked.
  • New behaviour: The CocoaAll unit no longer causes the CoreImage framework to be linked.
  • Reason for change: The CoreImage framework is not available on OS X 10.10 and earlier (it's part of QuartzCore there, and does not exist at all on some even older versions).
  • Remedy: If you use functionality that is only available as part of the separate CoreImage framework, explicitly link it in your program using the {$linkframework CoreImage} directive.
  • svn: 45767

DB

TMSSQLConnection uses TDS protocol version 7.3 (MS SQL Server 2008)
  • Old behaviour: TMSSQLConnection used TDS protocol version 7.0 (MS SQL Server 2000).
  • New behaviour: TMSSQLConnection uses TDS protocol version 7.3 (MS SQL Server 2008).
  • Reason for change: native support for new data types introduced in MS SQL Server 2008 (like DATE, TIME, DATETIME2). FreeTDS client library version 0.95 or higher required.
  • svn: 42737
DB.TFieldType: new types added
  • Old behaviour: .
  • New behaviour: Some of new Delphi field types were added (ftOraTimeStamp, ftOraInterval, ftLongWord, ftShortint, ftByte, ftExtended) + corresponding classes TLongWordField, TShortIntField, TByteField
  • Reason for change: align with Delphi and open space for support of short integer and unsigned integer data types
  • svn: 47217

DaemonApp

TDaemonThread
  • Old behaviour: The virtual method TDaemonThread.HandleControlCode takes a single DWord parameter containing the control code.
  • New behaviour: The virtual method TDaemonThread.HandleControlCode takes three parameters of which the first is the control code, the other two are an additional event type and event data.
  • Reason for change: Allow for additional event data to be passed along which is required for comfortable handling of additional control codes provided on Windows.
  • svn: 46327
TDaemon
  • Old behaviour: If an event handler is assigned to OnControlCode then it will be called if the daemon receives a control code.
  • New behaviour: If an event handler is assigned to OnControlCodeEvent and that sets the AHandled parameter to True then OnControlCode won't be called, otherwise it will be called if assigned.
  • Reason for change: This was necessary to implement the handling of additional arguments for control codes with as few backwards incompatible changes as possible.
  • svn: 46327

FileInfo

  • Old behaviour: The FileInfo unit is part of the fcl-base package.
  • New behaviour: The FileInfo unit is part of the fcl-extra package.
  • Reason for change: Breaks up a cycle in build dependencies after introducing a RC file parser into fcl-res. This should only affect users that compile trunk due to stale PPU files in the old location or that use a software distribution that splits the FPC packages (like Debian).
  • svn: 46392

AArch64/ARM64

{-style comments no longer supported in assembler blocks

  • Old behaviour: The { character started a comment in assembler blocks, like in Pascal
  • New behaviour: The { character now has a different meaning in the AArch64 assembler reader, so it can no longer be used to start comments.
  • Reason for change: Support has been added for register sets in the AArch64 assembler reader (for the ld1/ld2/../st1/st2/... instructions), which also start with {.
  • Remedy: Use (* or // to start comments
  • svn: 47116


Darwin/iOS

The Darwin targets corresponding to iOS have been renamed to iOS

  • Old behaviour: The Darwin/ARM and Darwin/AArch64 (ARM64) targets generated code for iOS running on those architectures.
  • New behaviour: The Darwin/AArch64 (ARM64) target generates code for macOS running on AArch64. To generate code for iOS, use the new iOS target (-Tios)
  • Reason for change: The switch of the macOS platform to AArch64
  • svn: 45762

Previous release notes