Difference between revisions of "paszlib"

From Free Pascal wiki
Jump to navigationJump to search
(tłumaczenie na polski)
(→‎Zip files with encoding filenames: Update encoding section for zipper. Info on directory separator issue.)
(38 intermediate revisions by 14 users not shown)
Line 1: Line 1:
 
{{paszlib}}
 
{{paszlib}}
  
'''paszlib''' jest konwersją na Pascal (a zatem bez zależności) standardowej biblioteki zlib, zaimplementowanej przez Jacques Nomssi Nzali (jego strona domowa wygasła, zobacz kontynuację tego projektu [http://sageshome.net/oss/paszlib-sg.php tutaj]). It is used in the FCL to implement the TCompressionstream class. The main unit of this package is '''paszlib'''. there are other, auxiliary units, but the unly unit that needs to be included in a typical program is this one. (View interface)
+
'''paszlib''' is a Pascal conversion of the standard zlib library: you don't need any external dependencies. It was implemented by Jacques Nomssi Nzali (his old homepage is dead, see a continuation of the project [http://sageshome.net/oss/paszlib-sg.php here]). It is used in the FCL to implement the TCompressionStream class.
  
==TZipper==
+
This class lets you compress and decompress '''.zip''' files.
  
===Using the latest TZipper===
+
The main unit of this package is '''paszlib'''. There are other, auxiliary units, but the only unit that needs to be included in a typical program is this one.
  
In FPC 2.3.1 there are many fixes which make TZipper much better. To be able to use them until the next FPC is released with those fixes one should follow the following steps:
+
=TZipper=
  
1 - Download zipper.pp, and only this file, from: http://svn.freepascal.org/cgi-bin/viewvc.cgi/trunk/packages/paszlib/src/
+
TZipper implements support for compressing and decompressing .zip files, but does not support all zip compression methods.
  
2 - Rename the file to a unique name, to avoid conflict with the fpc unit, like myzipper.pp and also change the name inside the source file.
+
==Documentation==
 +
See [http://www.freepascal.org/docs-html/fcl/zipper/index.html official FPC documentation for Zipper]
  
3 - Add the file to your project and use the TZipper from there.
+
==Examples==
  
===Usage example===
+
===Zip files===
  
<pre>
+
Create a zip file named as first parameter. Treats all other parameters as filenames to add, so you can specify e.g.  
FZipper.FileName:=ParamStr(1);
 
For I:=2 to ParamCount do
 
  begin
 
  F:=TFileStream.Create(ParamStr(i),fmOpenRead);
 
  FZipper.Entries.AddFileEntry(F,ParamStr(i));
 
  end;
 
FZipper.ZipAllFiles;
 
For I:=0 to FZipper.Entries.Count-1 do
 
  FZipper.Entries[I].Stream.Free;
 
</pre>
 
  
 +
<syntaxhighlight lang="dos">zipper newzip.zip autoexec.bat config.sys</syntaxhighlight>
  
Go to back [[Package_List|Packages List]]
+
<syntaxhighlight lang=pascal>
 +
uses
 +
  Zipper;
 +
var
 +
  OurZipper: TZipper;
 +
  I: Integer;
 +
begin
 +
  OurZipper := TZipper.Create;
 +
  try
 +
    // Define the file name of the zip file to be created
 +
    OurZipper.FileName := ParamStr(1);
 +
    for I := 2 to ParamCount do
 +
      // Specify the names of the files to be included in the zip as first argument
 +
      // The second argument is the name of the file as it appears in the zip and
 +
      // later in the file system after unzipping
 +
      OurZipper.Entries.AddFileEntry(ParamStr(I), ParamStr(I));
 +
    // Execute the zipping operation and write the zip file.
 +
    OurZipper.ZipAllFiles;
 +
  finally
 +
    OurZipper.Free;
 +
  end;
 +
end.
 +
</syntaxhighlight>
 +
 
 +
Please note that the names of the files to be zipped are assumed to contain only characters of the old IBM PC character set (code page 437). For extended characters (UTF-8), see the section below.
 +
 
 +
===Unzip files===
 +
 
 +
Unzip all files in archive c:\test.zip into directory c:\windows\temp\
 +
 
 +
<syntaxhighlight lang=pascal>uses
 +
  Zipper;
 +
var
 +
  UnZipper: TUnZipper;
 +
begin
 +
  UnZipper := TUnZipper.Create;
 +
  try   
 +
    UnZipper.FileName := 'c:\test.zip';
 +
    UnZipper.OutputPath := 'c:\windows\temp';
 +
    UnZipper.Examine;
 +
    UnZipper.UnZipAllFiles;
 +
  finally
 +
    UnZipper.Free;
 +
  end;
 +
end.</syntaxhighlight>
 +
 
 +
===Zip files with encoding filenames===
 +
 
 +
As already noted, the zip file format originally was written to support only code page 437 of the IBM PC. In modern operating systems, however, the encoding of file names is much more general.
 +
 
 +
If your '''FPC is version 3.2 or newer''' you can take advantage of the boolean property <tt>UseLanguageEncoding</tt>. When set to <tt>true</tt>, file names are assumed to have the default encoding of FPC, in case of Lazarus programs this is UTF-8. Here any file name can be passed to the zipper (except for restrictions of the OS, of course).
 +
 
 +
In the following practical routine for FPC 3.2, a zip file is created from the files in a given directory so that file names are considered correctly:
 +
<syntaxhighlight lang=pascal>
 +
uses
 +
  FileUtil, zipper;
 +
 
 +
function PackFiles(AZipFilename, ADirectory, AMask: String;
 +
  IncludingSubDirs: Boolean): Boolean;
 +
var
 +
  OurZipper: TZipper;
 +
  list: TStringList;
 +
  i: Integer;
 +
  diskFileName, archiveFileName: String;
 +
begin
 +
  Result := false;
 +
  ADirectory := IncludeTrailingPathDelimiter(ADirectory);
 +
  if DirectoryExists(ADirectory) then
 +
  begin
 +
    OurZipper := TZipper.Create;
 +
    try
 +
      // Set the name of the zip file to be created
 +
      OurZipper.FileName := AZipFileName;
 +
 
 +
      // Read names of the files contained in ADirectory to a stringlist
 +
      list := TStringList.Create;
 +
      try
 +
        // FindAllFiles adds all file names matching the mask (e.g. '*.*')
 +
        // found in the given directory to the provided list.
 +
        // When IncludingSubDirs is true the search continues recursively in
 +
        // the subdirectories.
 +
        FindAllFiles(list, ADirectory, AMask, IncludingSubDirs);
 +
        for i := 0 to list.Count - 1 do
 +
        begin
 +
          // diskfilename is the name of the file to be zipped on the disk
 +
          diskFileName := list[i];
 +
          // archivefilename is the name of the file to be zipped as it appears
 +
          // in the zip. We remove the deirectory from the
 +
          archiveFileName := StringReplace(diskFileName, ADirectory, '', []);
 +
          // Store these filenames for the zipper
 +
          OurZipper.Entries.AddFileEntry(diskFileName, archiveFileName);
 +
        end;
 +
      finally
 +
        list.Free;
 +
      end;
 +
      // By default zipper writes file names in encoding of the IBM PC, CP437.
 +
      // UTF8 encoding is written when UseLanguageEncoding is true.
 +
      OurZipper.UseLanguageEncoding := true;  // Requires FPC 3.2+
 +
      // create and write the zip file
 +
      OurZipper.ZipAllFiles;
 +
      Result := true;
 +
    finally
 +
      OurZipper.Free;
 +
    end;
 +
  end else
 +
    Result := false;
 +
end;</syntaxhighlight>
 +
 
 +
If your '''FPC is older than v3.2''' you must convert the ArchiveFileName argument to CP437 - of course, this is not possible for all characters, and thus you must be very careful with zipper in this case. Note also that the <tt>DiskFileName</tt> must have the encoding required by the operating system, otherwise the file will not be found for zipping; in case of FPC before 3.0 this may require another code page conversion.
 +
 
 +
Here is the adaption of above example for an FPC version before 3.2:
 +
<syntaxhighlight lang=pascal>
 +
uses
 +
  FileUtil, LConvEncoding, LazUTF8, Zipper;
 +
 
 +
function PackFiles(AZipFilename, ADirectory, AMask: String;
 +
  IncludingSubdirs: Boolean): Boolean;
 +
var
 +
  OurZipper: TZipper;
 +
  list: TStringList;
 +
  i: Integer;
 +
  diskFileName, archiveFileName: String;
 +
begin
 +
  Result := false;
 +
  if AMask = '' then AMask := '*.*';
 +
  ADirectory := IncludeTrailingPathDelimiter(ADirectory);
 +
  if DirectoryExists(ADirectory) then
 +
  begin
 +
    OurZipper := TZipper.Create;
 +
    try
 +
      OurZipper.FileName := AZipFileName;
 +
      list := TStringList.Create;
 +
      try
 +
        // List all files in ADirectory and, if required, its sub-directories.
 +
        FindAllFiles(list, ADirectory, AMask, IncludingSubDirs);
 +
        for i := 0 to list.Count-1 do
 +
        begin
 +
          // Name of the file to be zipped on disk
 +
          diskFileName := list[i];
 +
          {$IF FPC_FullVersion < 30000}
 +
          diskFileName := UTF8ToWinCP(diskFileName);
 +
          {$IFEND}
 +
          // Name of the file to be zipped in the archive: we remove the
 +
          // common path and thus make the files relative to the directory
 +
          // into which they will be unzipped later.
 +
          archiveFileName := StringReplace(list[i], ADirectory, '', []);
 +
          archiveFileName := UTF8ToCP437(archiveFileName);
 +
          OurZipper.Entries.AddFileEntry(diskFileName, archiveFileName);
 +
        end;
 +
      finally
 +
        list.Free;
 +
      end;
 +
      // Execute zipping action and create zip file
 +
      OurZipper.ZipAllFiles;
 +
      Result := true;
 +
    finally
 +
      OurZipper.Free;
 +
    end;
 +
  end;
 +
end;</syntaxhighlight>
 +
 
 +
Another restriction is the path delimiter in the archived file name. Specification of the zip format requires that forward slashes ('<tt>/</tt>') are used even in case of Windows. This is important for the one-parameter overload of <tt>TZipper.Entries.AddFileEntry(DiskfileName)</tt> which simply assume the archived file name to be equal to the <tt>DiskFileName</tt>, without any adaptions. Therefore, such a zip file will contain backslashes on Windows. It will unzip correctly on Windows, but not on Linux where the backslash is considered to be a valid file name character. It is highly recommended to use the two-parameter version of <tt>TZipper.Entries.AFileEntry(DiskFileName, ArchiveFileName)</tt> with <tt>ArchivefileName = DiskFileName</tt> because this procedure automatically replaces the path delimiters as required.
 +
 
 +
===Unzip files with encoding filenames===
 +
 
 +
<syntaxhighlight lang=pascal>uses
 +
  Zipper, LConvEncoding;
 +
...
 +
function EndPathCP866ToUTF8(AText:string):string;
 +
var
 +
  c,i:integer;
 +
  s,s1,s2,chr:string;
 +
begin
 +
  s:='';
 +
  c:=UTF8Length(AText);
 +
  for i:=c downto 1 do
 +
  begin
 +
      chr:=UTF8Copy(AText,i,1);
 +
      if ((not(chr='/')) and (not(chr='\')))or(i=c) then
 +
      begin
 +
            s:=UTF8Copy(AText,i,1)+s;
 +
      end
 +
      else begin
 +
            s:=UTF8Copy(AText,i,1)+s;
 +
            break;
 +
      end;
 +
  end;
 +
  dec(i);
 +
  s1:=UTF8Copy(AText,1,i);
 +
  s2:=CP866ToUTF8(s);
 +
  Result:=s1+s2;
 +
end;
 +
 
 +
function UnPackFiles(Filename, UnPackPath: String): Integer;
 +
var
 +
  UnZipper          :TUnZipper; //PasZLib
 +
  UnPackFileDir,
 +
  ADiskFileName,
 +
  ANewDiskFileName,
 +
  AArchiveFileName  :String;
 +
  i                :integer;
 +
begin
 +
  Result:=-1;
 +
  if FileExists(Filename)and DirectoryExists(UnPackPath) then
 +
  begin
 +
      UnPackFileDir :=SysUtils.IncludeTrailingPathDelimiter(UnPackPath);
 +
      UnZipper      :=TUnZipper.Create;
 +
      try
 +
          UnZipper.FileName  := Filename;
 +
          UnZipper.OutputPath := UnPackPath;
 +
          UnZipper.Examine;
 +
          UnZipper.UnZipAllFiles;
 +
 
 +
          for i:=UnZipper.Entries.Count-1 downto 0 do
 +
          begin
 +
              AArchiveFileName:=UnZipper.Entries.Entries[i].ArchiveFileName;
 +
              AArchiveFileName:=EndPathCP866ToUTF8(AArchiveFileName);
 +
              AArchiveFileName:=UTF8ToSys(AArchiveFileName);
 +
              ANewDiskFileName:=UnPackFileDir+AArchiveFileName;
 +
              ADiskFileName  :=UnPackFileDir+UnZipper.Entries.Entries[i].DiskFileName;
 +
 
 +
              if FileExists(ADiskFileName) then
 +
              begin
 +
                RenameFile(ADiskFileName, ANewDiskFileName);
 +
              end
 +
              else if DirectoryExists(ADiskFileName) then
 +
              begin
 +
                ADiskFileName    :=SysUtils.IncludeTrailingPathDelimiter(ADiskFileName);
 +
                ANewDiskFileName :=SysUtils.IncludeTrailingPathDelimiter(ANewDiskFileName);
 +
                RenameFile(ADiskFileName, ANewDiskFileName);
 +
              end;
 +
          end;
 +
 
 +
          Result:=1;
 +
      finally
 +
          UnZipper.Free;
 +
      end;
 +
  end;
 +
end;   
 +
</syntaxhighlight>
 +
 
 +
More examples can be found in the FPC source directory:
 +
* examples: [http://svn.freepascal.org/svn/fpc/trunk/packages/paszlib/examples/]
 +
* the test program: [http://svn.freepascal.org/svn/fpc/trunk/packages/paszlib/tests]
 +
 
 +
===Unzip file to a stream===
 +
 
 +
In Lazarus, drop a TMemo, TButton, TEdit and TFileNameEdit on a form. Clicking the button will read the zip file in FileNameEdit, extract the file specified in the Edit box, and display the content in Memo.
 +
 
 +
<syntaxhighlight lang=pascal>
 +
uses
 +
  Zipper;
 +
 
 +
...
 +
 
 +
procedure TForm1.Button1Click(Sender: TObject);
 +
begin
 +
  ExtractFileFromZip(FileNameEdit1.FileName,Edit1.Text);
 +
end;
 +
 
 +
procedure TForm1.DoCreateOutZipStream(Sender: TObject; var AStream: TStream;
 +
  AItem: TFullZipFileEntry);
 +
begin
 +
  AStream:=TMemorystream.Create;
 +
end;
 +
 
 +
procedure TForm1.DoDoneOutZipStream(Sender: TObject; var AStream: TStream;
 +
  AItem: TFullZipFileEntry);
 +
begin
 +
  AStream.Position:=0;
 +
  Memo1.lines.LoadFromStream(Astream);
 +
  Astream.Free;
 +
end;
 +
 
 +
procedure TForm1.ExtractFileFromZip(ZipName, FileName: string);
 +
var
 +
  ZipFile: TUnZipper;
 +
  sl:TStringList;
 +
begin
 +
  sl:=TStringList.Create;
 +
  sl.Add(FileName);
 +
  ZipFile := TUnZipper.Create;
 +
  try
 +
    ZipFile.FileName := ZipName;
 +
    ZipFile.OnCreateStream := @DoCreateOutZipStream;
 +
    ZipFile.OnDoneStream:=@DoDoneOutZipStream;
 +
    ZipFile.UnZipFiles(sl);
 +
  finally
 +
    ZipFile.Free;
 +
    sl.Free;
 +
  end;
 +
end;
 +
</syntaxhighlight>
 +
 
 +
===Zipping a whole directory tree===
 +
 
 +
*This will recursively add the contents of 'C:\MyFolder' to the 'myzipfile.zip'
 +
**Note that the absolute path is stored in the zipfile
 +
**Note that this requires the Lazarus fileutil unit (which you can probably work around)
 +
 
 +
<syntaxhighlight lang=pascal>
 +
Uses ...Zipper,FileUtil
 +
var
 +
  AZipper: TZipper;
 +
  TheFileList:TStringList;
 +
begin
 +
  MyDirectory:='C:\MyFolder';
 +
  AZipper := TZipper.Create;
 +
  AZipper.Filename := 'myzipfile.zip';
 +
  TheFileList:=TStringList.Create;
 +
  try
 +
    FindAllFiles(TheFileList, MyDirectory);
 +
    AZipper.Entries.AddFileEntries(TheFileList);
 +
    AZipper.ZipAllFiles;
 +
  finally
 +
    TheFileList.Free;
 +
    AZipper.Free;
 +
  end;
 +
end;                     
 +
</syntaxhighlight>
 +
 
 +
===Zipping a whole directory tree storing only a relative path===
 +
 
 +
*This is more complicated, but it can be done
 +
**Note that this requires the Lazarus fileutil unit (which you can probably work around)
 +
 
 +
<syntaxhighlight lang=pascal>
 +
Uses ...Zipper,FileUtil,strutils
 +
var
 +
  AZipper: TZipper;
 +
  szPathEntry:String;
 +
  i:Integer;
 +
  ZEntries : TZipFileEntries;
 +
  TheFileList:TStringList;
 +
  RelativeDirectory:String;
 +
begin
 +
  AZipper := TZipper.Create;
 +
  try
 +
    try
 +
      AZipper.Filename := 'myzipfile.zip';
 +
      RelativeDirectory:='C:\MyFolder\MyFolder\';
 +
      AZipper.Clear;
 +
      ZEntries := TZipFileEntries.Create(TZipFileEntry);
 +
      // Verify valid directory
 +
      If DirPathExists(RelativeDirectory) then
 +
      begin
 +
        // Construct the path to the directory BELOW RelativeDirectory
 +
        // If user specifies 'C:\MyFolder\Subfolder' it returns 'C:\MyFolder\'
 +
        // If user specifies 'C:\MyFolder' it returns 'C:\'
 +
        // If user specifies 'C:\' it returns 'C:\'
 +
        i:=RPos(PathDelim,ChompPathDelim(RelativeDirectory));
 +
        szPathEntry:=LeftStr(RelativeDirectory,i);
 +
 
 +
        // Use the FileUtils.FindAllFiles function to get everything (files and folders) recursively
 +
        TheFileList:=TstringList.Create;
 +
        try
 +
          FindAllFiles(TheFileList, RelativeDirectory);
 +
          for i:=0 to TheFileList.Count -1 do
 +
          begin
 +
            // Make sure the RelativeDirectory files are not in the root of the ZipFile
 +
            ZEntries.AddFileEntry(TheFileList[i],CreateRelativePath(TheFileList[i],szPathEntry));
 +
          end;
 +
        finally
 +
          TheFileList.Free;
 +
        end;
 +
      end;
 +
      if (ZEntries.Count > 0) then
 +
        AZipper.ZipFiles(ZEntries);
 +
      except
 +
        On E: EZipError do
 +
          E.CreateFmt('Zipfile could not be created%sReason: %s', [LineEnding, E.Message])
 +
      end;
 +
    result := True;
 +
  finally
 +
    FreeAndNil(ZEntries);
 +
    AZipper.Free;
 +
  end; 
 +
end;
 +
</syntaxhighlight>
 +
 
 +
Note that this example uses an overloaded version of addfileentry() (compared to simple examples). This version allows you to specify the directory structure inside the Zip file, and, then, of course, the directory structure when its all unzipped. You can, for example, specify only the file name with no directory structure and have all files returned in one flat output directory. Even if they came for all over the place !
 +
 
 +
<syntaxhighlight lang=pascal>ZEntries.AddFileEntry(FullDiskPathToFile, FileName);</syntaxhighlight>
 +
 
 +
== See also ==
 +
 
 +
* [http://www.freepascal.org/docs-html/fcl/zipper/index.html official FPC documentation for Zipper]
 +
* [http://www.freepascal.org/~michael/articles/archives/archives.pdf Article] demonstrating handling tar, bzip2, gzip, zip files and Blowfish encryption in FreePascal/Lazarus. A good introduction even though it was written some time ago (a lot of functionality has been improved).
 +
* [[unzip|unzip]]
 +
* [[FreePascalArchivePackage]] Abbrevia archive/zip library
 +
* [http://code.google.com/p/kstools/ MIT licensed Delphi/Object Pascal library] that includes zip file support.
 +
 
 +
Go back to [[Package_List|Packages List]]
 +
 
 +
[[Category:Tutorials]]
 +
[[Category:FPC]]
 +
[[Category:Lazarus]]
 +
[[Category:Packages]]

Revision as of 14:22, 30 April 2021

Deutsch (de) English (en) 한국어 (ko) polski (pl) русский (ru)

paszlib is a Pascal conversion of the standard zlib library: you don't need any external dependencies. It was implemented by Jacques Nomssi Nzali (his old homepage is dead, see a continuation of the project here). It is used in the FCL to implement the TCompressionStream class.

This class lets you compress and decompress .zip files.

The main unit of this package is paszlib. There are other, auxiliary units, but the only unit that needs to be included in a typical program is this one.

TZipper

TZipper implements support for compressing and decompressing .zip files, but does not support all zip compression methods.

Documentation

See official FPC documentation for Zipper

Examples

Zip files

Create a zip file named as first parameter. Treats all other parameters as filenames to add, so you can specify e.g.

zipper newzip.zip autoexec.bat config.sys
uses
  Zipper;
var
  OurZipper: TZipper;
  I: Integer;
begin
  OurZipper := TZipper.Create;
  try
    // Define the file name of the zip file to be created
    OurZipper.FileName := ParamStr(1);
    for I := 2 to ParamCount do
      // Specify the names of the files to be included in the zip as first argument
      // The second argument is the name of the file as it appears in the zip and 
      // later in the file system after unzipping
      OurZipper.Entries.AddFileEntry(ParamStr(I), ParamStr(I));
    // Execute the zipping operation and write the zip file.
    OurZipper.ZipAllFiles;
  finally
    OurZipper.Free;
  end;
end.

Please note that the names of the files to be zipped are assumed to contain only characters of the old IBM PC character set (code page 437). For extended characters (UTF-8), see the section below.

Unzip files

Unzip all files in archive c:\test.zip into directory c:\windows\temp\

uses
  Zipper;
var
  UnZipper: TUnZipper;
begin
  UnZipper := TUnZipper.Create;
  try    
    UnZipper.FileName := 'c:\test.zip';
    UnZipper.OutputPath := 'c:\windows\temp';
    UnZipper.Examine;
    UnZipper.UnZipAllFiles;
  finally
    UnZipper.Free;
  end;
end.

Zip files with encoding filenames

As already noted, the zip file format originally was written to support only code page 437 of the IBM PC. In modern operating systems, however, the encoding of file names is much more general.

If your FPC is version 3.2 or newer you can take advantage of the boolean property UseLanguageEncoding. When set to true, file names are assumed to have the default encoding of FPC, in case of Lazarus programs this is UTF-8. Here any file name can be passed to the zipper (except for restrictions of the OS, of course).

In the following practical routine for FPC 3.2, a zip file is created from the files in a given directory so that file names are considered correctly:

uses
  FileUtil, zipper;

function PackFiles(AZipFilename, ADirectory, AMask: String;
  IncludingSubDirs: Boolean): Boolean;
var
  OurZipper: TZipper;
  list: TStringList;
  i: Integer;
  diskFileName, archiveFileName: String;
begin
  Result := false;
  ADirectory := IncludeTrailingPathDelimiter(ADirectory);
  if DirectoryExists(ADirectory) then
  begin
     OurZipper := TZipper.Create;
     try
       // Set the name of the zip file to be created
       OurZipper.FileName := AZipFileName;

       // Read names of the files contained in ADirectory to a stringlist
       list := TStringList.Create;
       try
         // FindAllFiles adds all file names matching the mask (e.g. '*.*')
         // found in the given directory to the provided list.
         // When IncludingSubDirs is true the search continues recursively in
         // the subdirectories.
         FindAllFiles(list, ADirectory, AMask, IncludingSubDirs);
         for i := 0 to list.Count - 1 do
         begin
           // diskfilename is the name of the file to be zipped on the disk
           diskFileName := list[i];
           // archivefilename is the name of the file to be zipped as it appears
           // in the zip. We remove the deirectory from the
           archiveFileName := StringReplace(diskFileName, ADirectory, '', []);
           // Store these filenames for the zipper
           OurZipper.Entries.AddFileEntry(diskFileName, archiveFileName);
         end;
       finally
         list.Free;
       end;
       // By default zipper writes file names in encoding of the IBM PC, CP437.
       // UTF8 encoding is written when UseLanguageEncoding is true.
       OurZipper.UseLanguageEncoding := true;  // Requires FPC 3.2+
       // create and write the zip file
       OurZipper.ZipAllFiles;
       Result := true;
     finally
       OurZipper.Free;
     end;
  end else
    Result := false;
end;

If your FPC is older than v3.2 you must convert the ArchiveFileName argument to CP437 - of course, this is not possible for all characters, and thus you must be very careful with zipper in this case. Note also that the DiskFileName must have the encoding required by the operating system, otherwise the file will not be found for zipping; in case of FPC before 3.0 this may require another code page conversion.

Here is the adaption of above example for an FPC version before 3.2:

uses
  FileUtil, LConvEncoding, LazUTF8, Zipper;

function PackFiles(AZipFilename, ADirectory, AMask: String;
  IncludingSubdirs: Boolean): Boolean;
var
  OurZipper: TZipper;
  list: TStringList;
  i: Integer;
  diskFileName, archiveFileName: String;
begin
  Result := false;
  if AMask = '' then AMask := '*.*';
  ADirectory := IncludeTrailingPathDelimiter(ADirectory);
  if DirectoryExists(ADirectory) then
  begin
     OurZipper := TZipper.Create;
     try
       OurZipper.FileName := AZipFileName;
       list := TStringList.Create;
       try
         // List all files in ADirectory and, if required, its sub-directories.
         FindAllFiles(list, ADirectory, AMask, IncludingSubDirs);
         for i := 0 to list.Count-1 do
         begin
           // Name of the file to be zipped on disk
           diskFileName := list[i];
           {$IF FPC_FullVersion < 30000}
           diskFileName := UTF8ToWinCP(diskFileName);
           {$IFEND}
           // Name of the file to be zipped in the archive: we remove the
           // common path and thus make the files relative to the directory
           // into which they will be unzipped later.
           archiveFileName := StringReplace(list[i], ADirectory, '', []);
           archiveFileName := UTF8ToCP437(archiveFileName);
           OurZipper.Entries.AddFileEntry(diskFileName, archiveFileName);
         end;
       finally
         list.Free;
       end;
       // Execute zipping action and create zip file
       OurZipper.ZipAllFiles;
       Result := true;
     finally
       OurZipper.Free;
     end;
  end;
end;

Another restriction is the path delimiter in the archived file name. Specification of the zip format requires that forward slashes ('/') are used even in case of Windows. This is important for the one-parameter overload of TZipper.Entries.AddFileEntry(DiskfileName) which simply assume the archived file name to be equal to the DiskFileName, without any adaptions. Therefore, such a zip file will contain backslashes on Windows. It will unzip correctly on Windows, but not on Linux where the backslash is considered to be a valid file name character. It is highly recommended to use the two-parameter version of TZipper.Entries.AFileEntry(DiskFileName, ArchiveFileName) with ArchivefileName = DiskFileName because this procedure automatically replaces the path delimiters as required.

Unzip files with encoding filenames

uses
  Zipper, LConvEncoding;
...
function EndPathCP866ToUTF8(AText:string):string;
var
  c,i:integer;
  s,s1,s2,chr:string;
begin
  s:='';
  c:=UTF8Length(AText);
  for i:=c downto 1 do
  begin
       chr:=UTF8Copy(AText,i,1);
       if ((not(chr='/')) and (not(chr='\')))or(i=c) then
       begin
            s:=UTF8Copy(AText,i,1)+s;
       end
       else begin
            s:=UTF8Copy(AText,i,1)+s;
            break;
       end;
  end;
  dec(i);
  s1:=UTF8Copy(AText,1,i);
  s2:=CP866ToUTF8(s);
  Result:=s1+s2;
end;

function UnPackFiles(Filename, UnPackPath: String): Integer;
var
  UnZipper          :TUnZipper; //PasZLib
  UnPackFileDir,
  ADiskFileName,
  ANewDiskFileName,
  AArchiveFileName  :String;
  i                 :integer;
begin
  Result:=-1;
  if FileExists(Filename)and DirectoryExists(UnPackPath) then
  begin
       UnPackFileDir :=SysUtils.IncludeTrailingPathDelimiter(UnPackPath);
       UnZipper      :=TUnZipper.Create;
       try
          UnZipper.FileName   := Filename;
          UnZipper.OutputPath := UnPackPath;
          UnZipper.Examine;
          UnZipper.UnZipAllFiles;

          for i:=UnZipper.Entries.Count-1 downto 0 do
          begin
              AArchiveFileName:=UnZipper.Entries.Entries[i].ArchiveFileName;
              AArchiveFileName:=EndPathCP866ToUTF8(AArchiveFileName);
              AArchiveFileName:=UTF8ToSys(AArchiveFileName);
              ANewDiskFileName:=UnPackFileDir+AArchiveFileName;
              ADiskFileName   :=UnPackFileDir+UnZipper.Entries.Entries[i].DiskFileName;

              if FileExists(ADiskFileName) then
              begin
                 RenameFile(ADiskFileName, ANewDiskFileName);
              end
              else if DirectoryExists(ADiskFileName) then
              begin
                 ADiskFileName    :=SysUtils.IncludeTrailingPathDelimiter(ADiskFileName);
                 ANewDiskFileName :=SysUtils.IncludeTrailingPathDelimiter(ANewDiskFileName);
                 RenameFile(ADiskFileName, ANewDiskFileName);
              end;
          end;

          Result:=1;
       finally
          UnZipper.Free;
       end;
  end;
end;

More examples can be found in the FPC source directory:

  • examples: [1]
  • the test program: [2]

Unzip file to a stream

In Lazarus, drop a TMemo, TButton, TEdit and TFileNameEdit on a form. Clicking the button will read the zip file in FileNameEdit, extract the file specified in the Edit box, and display the content in Memo.

uses
  Zipper;

...

procedure TForm1.Button1Click(Sender: TObject);
begin
  ExtractFileFromZip(FileNameEdit1.FileName,Edit1.Text);
end;

procedure TForm1.DoCreateOutZipStream(Sender: TObject; var AStream: TStream;
  AItem: TFullZipFileEntry);
begin
  AStream:=TMemorystream.Create;
end;

procedure TForm1.DoDoneOutZipStream(Sender: TObject; var AStream: TStream;
  AItem: TFullZipFileEntry);
begin
  AStream.Position:=0;
  Memo1.lines.LoadFromStream(Astream);
  Astream.Free;
end;

procedure TForm1.ExtractFileFromZip(ZipName, FileName: string);
var
  ZipFile: TUnZipper;
  sl:TStringList;
begin
  sl:=TStringList.Create;
  sl.Add(FileName);
  ZipFile := TUnZipper.Create;
  try
    ZipFile.FileName := ZipName;
    ZipFile.OnCreateStream := @DoCreateOutZipStream;
    ZipFile.OnDoneStream:=@DoDoneOutZipStream;
    ZipFile.UnZipFiles(sl);
  finally
    ZipFile.Free;
    sl.Free;
  end;
end;

Zipping a whole directory tree

  • This will recursively add the contents of 'C:\MyFolder' to the 'myzipfile.zip'
    • Note that the absolute path is stored in the zipfile
    • Note that this requires the Lazarus fileutil unit (which you can probably work around)
Uses ...Zipper,FileUtil
var
  AZipper: TZipper;
  TheFileList:TStringList;
begin
  MyDirectory:='C:\MyFolder';
  AZipper := TZipper.Create;
  AZipper.Filename := 'myzipfile.zip';
  TheFileList:=TStringList.Create;
  try
    FindAllFiles(TheFileList, MyDirectory);
    AZipper.Entries.AddFileEntries(TheFileList);
    AZipper.ZipAllFiles;
  finally
    TheFileList.Free;
    AZipper.Free;
  end;
end;

Zipping a whole directory tree storing only a relative path

  • This is more complicated, but it can be done
    • Note that this requires the Lazarus fileutil unit (which you can probably work around)
Uses ...Zipper,FileUtil,strutils
var
  AZipper: TZipper;
  szPathEntry:String;
  i:Integer;
  ZEntries : TZipFileEntries;
  TheFileList:TStringList;
  RelativeDirectory:String;
begin
  AZipper := TZipper.Create;
  try
    try
      AZipper.Filename := 'myzipfile.zip';
      RelativeDirectory:='C:\MyFolder\MyFolder\';
      AZipper.Clear;
      ZEntries := TZipFileEntries.Create(TZipFileEntry);
      // Verify valid directory
      If DirPathExists(RelativeDirectory) then
      begin
        // Construct the path to the directory BELOW RelativeDirectory
        // If user specifies 'C:\MyFolder\Subfolder' it returns 'C:\MyFolder\'
        // If user specifies 'C:\MyFolder' it returns 'C:\'
        // If user specifies 'C:\' it returns 'C:\'
        i:=RPos(PathDelim,ChompPathDelim(RelativeDirectory));
        szPathEntry:=LeftStr(RelativeDirectory,i);

        // Use the FileUtils.FindAllFiles function to get everything (files and folders) recursively
        TheFileList:=TstringList.Create;
        try
          FindAllFiles(TheFileList, RelativeDirectory);
          for i:=0 to TheFileList.Count -1 do
          begin
            // Make sure the RelativeDirectory files are not in the root of the ZipFile
            ZEntries.AddFileEntry(TheFileList[i],CreateRelativePath(TheFileList[i],szPathEntry));
          end;
        finally
          TheFileList.Free;
        end;
      end;
      if (ZEntries.Count > 0) then
        AZipper.ZipFiles(ZEntries);
      except
        On E: EZipError do
          E.CreateFmt('Zipfile could not be created%sReason: %s', [LineEnding, E.Message])
      end;
    result := True;
  finally
    FreeAndNil(ZEntries);
    AZipper.Free;
  end;  
end;

Note that this example uses an overloaded version of addfileentry() (compared to simple examples). This version allows you to specify the directory structure inside the Zip file, and, then, of course, the directory structure when its all unzipped. You can, for example, specify only the file name with no directory structure and have all files returned in one flat output directory. Even if they came for all over the place !

ZEntries.AddFileEntry(FullDiskPathToFile, FileName);

See also

Go back to Packages List