ARM Linux Embedded Systems
From Free Pascal wiki
Jump to navigationJump to searchThis page shall offer a hardware selection guide for those seeking an ARM based (eg low power) platform for FPC and want also to benefit of the capabilities of the underlying Linux OS. Development kits are listed below their respective targets(mentioning the additional features in the I/O column)
Also this will link to a FPC Embedded Nutshell page, which holds readymade 'hello world' samples for various systems, to be able to tryout FPC on your system before having to undergo a full installation and a possible build/crosscompile etc.
Products are listed alphabetically.
Model | Version | CPU | Arch | Speed | RAM | Flash | ext. Stor | I/O | JTAG | OS | Kernel | FPC Notes |
---|---|---|---|---|---|---|---|---|---|---|---|---|
ARM 9 Boards by Artila | ||||||||||||
M-501 | Atmel AT91RM9200 ARM920 |
4T | 180MHz | 64M | 16M | - | 1E,4S,32D,3UH,I2C,SPI,SD | Yes | Linux | 2.6.14.x | - | |
PAC-5010 | - | - | - | - | - | - | SD | 2E,1S,1*485,16 opto DI, 8 opto DO | - | - | - | - |
BeagleBoard | ||||||||||||
BeagleBoard | TI OMAP3530 |
7R | 720MHz | 256M | 256M | - | UH,UG,1S,2K,SD,HDMI,S-video,Sound IO | Yes | Linux | 2.6.x.x | - | |
DilNet-PC by SSV | ||||||||||||
DNP-9200 | Rev2 | Atmel AT91RM9200 ARM920 |
4T | 180MHz | 32M | 16M | - | 1E,3S,UH,UD,20D,SPI,SD | Yes | Linux | 2.6.x.x | - |
DNP/SK23 | - | - | - | - | - | - | SD | LCD(4x16Ch),4K | - | - | - | - |
ADNP-9200 | Rev2 | Atmel AT91RM9200 ARM920 |
4T | 180MHz | 64M | 16/32M | - | 2E,3S,UH,UD,20D,CF | Yes | Linux | 2.6.x.x | - |
DNP/SK27 | - | - | - | - | - | - | SD | LCD(128x64,T6963C),4K | - | - | - | - |
Eddy CPU by System Base | ||||||||||||
Eddy CPU | V2.5 | ARM9G20 | _ | 400MHz | 32M | 8M | _ | 1E,4S,UH,UG,56D | Yes | Linux | 2.6 | - |
IGEPv2 Board | ||||||||||||
IGEPv2 Board | Rev C | TI OMAP3530 | A8 | 600MHz | 4G | 4G | SD | 1E,1S,UH,UG,WiFi,BT,DVI-D | Yes | Linux | 2.6 | - |
Open Moko | ||||||||||||
GTA02 | - | Samsung 2442B ARM920T |
4T | 400-500MHz | 128M | 256+2MB | ||||||
Open Risc by Vision Systems | ||||||||||||
ALEKTO | - | ARM922T | 4T | 166Mhz | 64M | 4M | CF | 2E,2S,8D,2 UH,MiniPCI,TWI | ??? | Debian | 2.4 | 2.2.2 native OK |
Raspberry Pi | ||||||||||||
Raspberry Pi | Model B | Broadcom BCM 2835 ARM1176JZF-S |
v6T | 700MHz | 256M | SD/MMC-Card | - | 1E,1S,2UH,??? | Yes | Linux | ? | - |
SheevaPlug | ||||||||||||
US-Version | - | Marvell 88F6281 ARM926EJ-S |
5TE | 800M-1G | 512M | 512M | - | 1EG,1S,UH,SD,2L,TWI | Yes | Linux | 2.6.x.x | - |
SheevaPlug at CCC for very detailed information (German) |
Shortcuts for Column 'I/O'
- nS Serial Ports
- nE Ethernet Ports
- nEG Ethernet Ports(Gigabit)
- nD Digital I/O
- nK Keys
- nL Leds
- UH USB Host
- UD USB Device
- UG USB OTG
- CF CF interface
Part of the information is taken from the OpenWrt project.