Difference between revisions of "Ultibo Quick Start"
Pdbreneman (talk | contribs) m |
Pdbreneman (talk | contribs) m |
||
Line 3: | Line 3: | ||
- Use a PC to install [https://www.matthuisman.nz/2017/02/how-to-install-pinn-lite.html PINN Lite] onto a 8 GB SD card. | - Use a PC to install [https://www.matthuisman.nz/2017/02/how-to-install-pinn-lite.html PINN Lite] onto a 8 GB SD card. | ||
- Set up Zero hardware (similar to [https://www.raspberrypi.org/learning/parents-guide/ this], but a little different as need USB hub and several micro to standard cables). '''PINN works with wireless keyboards and mice (unlike NOOBS)!'''<br/> | - Set up Zero hardware (similar to [https://www.raspberrypi.org/learning/parents-guide/ this], but a little different as need USB hub and several micro to standard cables). '''PINN works with wireless keyboards and mice (unlike NOOBS)!'''<br/> | ||
− | - Note: the | + | - Note: the script takes about 30 minutes on a RPi3B<br/> |
- Power up your Raspberry Pi, configure Internet access (if using WiFi)<br/> | - Power up your Raspberry Pi, configure Internet access (if using WiFi)<br/> | ||
- Select your Language near the bottom of the screen<br/> | - Select your Language near the bottom of the screen<br/> | ||
Line 18: | Line 18: | ||
chmod u+rx ultiboinstaller.sh<br/> | chmod u+rx ultiboinstaller.sh<br/> | ||
./ultiboinstaller.sh '''(confirm don't want Lazarus, do want to build the Hello World examples)'''<br/> | ./ultiboinstaller.sh '''(confirm don't want Lazarus, do want to build the Hello World examples)'''<br/> | ||
− | + | '''Completes on RPi3B. On Zero get: Fatal I/O error: Disk Full'''<br/> | |
sudo poweroff '''(wait for LED off before remove power)'''<br/> | sudo poweroff '''(wait for LED off before remove power)'''<br/> | ||
Revision as of 02:04, 25 September 2019
Our goal is to use a Raspberry Pi Zero Wireless With Headers (with Sense HAT documented more here, here, and here).
- Use a PC to install PINN Lite onto a 8 GB SD card.
- Set up Zero hardware (similar to this, but a little different as need USB hub and several micro to standard cables). PINN works with wireless keyboards and mice (unlike NOOBS)!
- Note: the script takes about 30 minutes on a RPi3B
- Power up your Raspberry Pi, configure Internet access (if using WiFi)
- Select your Language near the bottom of the screen
- Make sure both LibreELEC and Raspbian Lite are selected to install, then click the Install button.
- When reboots, select Raspbian to boot, and delay login as Raspbian does updates automatically by itself, login (user pi and password raspberry)
- We are basically following the "headless" set up here.
- Enter the following lines (without bold comment text)
sudo sh -c "apt update && apt dist-upgrade && apt autoremove"
sudo raspi-config (to select timezone under Locale)
sudo reboot
(login)
sudo apt install libgtk2.0-dev libghc-x11-dev binutils-arm-none-eabi (temp to install 170 packages until script is fixed so don't need these)
wget https://github.com/ultibohub/Tools/releases/latest/download/ultiboinstaller.sh
chmod u+rx ultiboinstaller.sh
./ultiboinstaller.sh (confirm don't want Lazarus, do want to build the Hello World examples)
Completes on RPi3B. On Zero get: Fatal I/O error: Disk Full
sudo poweroff (wait for LED off before remove power)
See also
- Ultibo_core
- EasyUltibo - where this wiki page started, more standard FPC & Python for SenseHat